Correction. He is talking about the bell crank bearing. There are two roller bearings in the bell crank. These wear sometimes. I found one worn on my Coupe. I also found it impossible to replace these bearings with simple tools. I'd rather have these replaced by someone who knows what he's doing - with some proper tools. I ended up replacing the whole bell crank.
Hartmut ----- Original Message ----- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [email protected] Sent: Sunday, June 08, 2008 9:06 PM Subject: Re: [ercoupe-tech] Re: Bell Crank bering Mark, I think you are speaking of the center control. He is interested in the left aileron bearing. Lee -- "Mark H." <[EMAIL PROTECTED]> wrote: There are two bearings in there, a top and a bottom. The part number is415-52307-1. The AN number is AN201-K4A. The new number is KP4A. Skyport and Univair should have them. And this is a aircraft bearing and will be very hard to find else were. hope this helps. Mark --- In [email protected], "claveled" <[EMAIL PROTECTED]> wrote: > > Hey gang, > Anyone have info on replacement of the left aileron bell crank bering > for my 415C? Took the wings off for my tri-annual AD and found excesive > play in the bell crank. Is it a bushing or a bering I can get from > Spruce or Univair? If so, what is the ID? Thanks. > Ed > N3396H > ____________________________________________________________ Beauty Advice Just Got a Makeover Read reviews about the beauty products you have always wanted to try
