John: in addition to what Hartmut says, you should check the location of  
your pitot tube. It needs to be 3 and 7/8 inches below the wing and parallel to 
 
the direction of flight (Fuselage)
Lynn Nelsen
 
 
In a message dated 8/4/2008 9:29:56 P.M. Eastern Daylight Time,  
[EMAIL PROTECTED] writes:

I wanted to mention a few things.  First, I apologize for  not showing my 
face at Oshkosh.  I arrived on Monday and left Sunday  morning.  I offer no 
excuse for not stopping over to say hello.  I  did fly up in a Beech Sundowner 
at a 
speedy 110 kts : )   The trip  from Georgetown, TX to Fon du Lac, WI and back 
gave me all sorts of confidence  about making the trip in the Ercoupe next 
year.  Once again I stayed at  Marian College which offers nice dorm rooms and 
breakfast each morning  starting at 6 am.

Speaking of the Ercoupe, as I mentioned some time  back I decided to have the 
engine overhauled earlier than TBO as the  maintenance records were less than 
stellar when I purchased the  airplane.  I sent the engine off to AeroMark in 
Florida.  It took  about 8 weeks from the time it was shipped until it was 
returned.  I  ended up having the 0-200 crank installed.  As some may recall, 
when I  did the first restoration on the airplane, about 2.5 years ago, I had 
good  engine compression, but could only achieve about a 300 fpm ROC.  I  
switched to a new climb that increased it by 50 fpm on a cool day (cool in  
this 
part of TX is about 80 degrees F).

Well, after a carburetor  overhaul problem (jetted incorrectly), I got to go 
test fly it today...   With an OAT of 105 degrees F today, I got a climb out 
of a solid 700 fpm at  2400 rpm!  At 2000 AGL performance dropped to about 500 
fpm, but still  very nice from my perspective.  I did not fly above 3000 AGL 
today as I  was looking for other sqawks.  By the way, my overhauled (last 
year) air  speed indicator displays 5 mph after starting (not rolling) since 
installed.  In addition, in the air, the indicator is about 20 mph high.  This 
was  
the case before overhaul of the instrument.  Seems all is right with  pitot 
and static lines.  Wondering if anyone has ideas about this.   I fly by 
attitude and use a GPS, but would like to make this work right if  possible.

This was an expensive way to get a better climb rate, but I  am happy with 
the results.  

Thanks for all the suggestions and  technical advice offered by the group...

John

PS - Part of my  time at Oshkosh was spent with Joe Kittinger and his wife 
Sherry, both with  whom I relish time with.  I wrote an article about him in 
the 
August  issue of Sport Aviation.  At 80, he flew with the Aeroshell team 
during a  demonstration flight at Oshkosh.  He still has the right stuff... by 
the 
 way, there were errors in the article around Joe's combat experience and his 
 age.  That was a mixup between me and the editors at SA (who happen to be  
top notch by the way).  All to be corrected next  month.



 




**************Looking for a car that's sporty, fun and fits in your budget? 
Read reviews on AOL Autos.      
(http://autos.aol.com/cars-BMW-128-2008/expert-review?ncid=aolaut00050000000017 
)

Reply via email to