Thanks, Eliacim. That gives me a number of places to diagnose the problem. It does seem that this latest problem is somehow associated with my recent repairs.
Thanks for the help. Frank --- In [email protected], "heavensounds" <heave...@...> wrote: > > If your radio is on a tray, I would start by pulling it out and cleaning the edge contacts on the printed circuit board. I would also check the antenna connector into the tray. Next, I would check the ground connections on the tray and make sure they are well connected to ground. I had an radio that was intermittently noisy for the longest time. The cause was a cold solder next to the ground edge contact, on the printed circuit board. Another problem I had with my radio was traced to a faulty external intercom. > Hope this helps. Others will surely give good tips. > Eliacim >
