Thanks for all the help... I'm sure I can get it right now! Blue Skies, Rick
--- On Fri, 5/8/09, John Cooper <[email protected]> wrote: From: John Cooper <[email protected]> Subject: RE: [ercoupe-tech] Battery installation: To: "'Ercoupe Tech List'" <> Date: Friday, May 8, 2009, 5:35 PM Rick: It’s negative ground. The negative wire may be a flat, braided cable. The positive wire goes to the master switch. Do not reverse them. Any installed electronics would be at risk. John Cooper Skyport Services www.skyportservices .net From: ercoupe-tech@ yahoogroups. com [mailto:ercoupe- t...@yahoogroups .com] On Behalf Of Rick Sent: Friday, May 08, 2009 4:18 PM To: ercoupe-tech@ yahoogroups. com Subject: [ercoupe-tech] Battery installation: Question: I removed my battery for replacement, and upon looking to install the new one made the A-HA realization that there is not a red and black wire to tell positive and negative. So I am not sure which wire goes where - or even if this is a positive or negative ground system. It is a 1946-C Serial number 1009. Does anyone know the best solution to this?. And what damage could I expect hooking it up wrong. Thanks for any input -- Rick Green
