Torque wrench and approperiate S.A.E. sockets. 7/8 for the plugs. If the prop is removed the bolts need to be torqued to about 25 ft pounds. I don'[t know the socket size right off for the prop bolts.
Mike Do not be mislead by popular opinion. --- On Mon, 7/6/09, Ed Burkhead <[email protected]> wrote: From: Ed Burkhead <[email protected]> Subject: RE: [ercoupe-tech] Ercoupe Annual Inspection Tools To: "'ety'" <[email protected]> Date: Monday, July 6, 2009, 9:55 AM First suggested change in the Annual Inspection “Tools Needed” list: Use the correct size S.A.E. wrench rather than using an adjustable wrench. So, let’s make the list: Tools needed · Differential compression tester and air compressor · Flashlight · Safety wire and pliers · Magneto timing tester · Mirror · Large crescent wrench Set of S.A.E. wrenches - sizes from ________ to _________ · Magnet · Spark plug socket and ratchet · Screwdrivers · Metal awl How often are the wing and center section re-inspections required? What special tools are needed for that? Ed
