I also have a 'G' model and my back seat attaches to the plane with three steel pins that use cotter pins to keep the pins in place. There is 3 metal brackets at the base of the back of the seats that you place the metal brackets from the back into and then pin them in place. It is a pain in the neck to get the cotter pins in and also the pins are nothing to brag about. I have had mine out several times in the past few months and believe me it is no fun. The seat back does just lay back against a metal stop on each side and it will move forward about 12 inches for getting into the back cargo area. I hope that helps - Jerry
--- On Tue, 1/5/10, Mike Powell <[email protected]> wrote: From: Mike Powell <[email protected]> Subject: [ercoupe-tech] 415 G To: [email protected] Date: Tuesday, January 5, 2010, 7:05 PM I recently purchased a seat from a 415 G with plans to install it in my 415 C. I soon discovered the G seat is not an exact replacement as the back is much lower . I have hopes of getting it installed but it sure would be helpful if a 415G owner would contact me and maybe sent a photo of how it anchors, what does the seat back tie into? Thanks. Mike Do not be mislead by popular opinion.
