Ed.
The case appears to be an early C-75 that had been setup for fuel injection. It seems to be common, but not that common. However, you probably won't be able to fit a vacuum pump there and no fuel injection either. These accessories require special cam shafts that are probably hard to get by. There used to be a fuel pump adapter that you could fit there also. That you could run from your current cam shaft. Hartmut To: [email protected] From: [email protected] Date: Sun, 14 Mar 2010 00:54:06 +0000 Subject: [ercoupe-tech] crancase mystery Anyone, My 75hp serial #4021 415C crankcase has a plate over the hole fwd. on the bottom, where what I believe should accomdate a vacuum pump. However, There is nothing in there to drive a pump. Just a bearing cap. Wondering if the case might have come from an 0-200. The engine has 800 plus hours since majored. Any Ideas. Thanks. Ed N3396H _________________________________________________________________ Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. https://signup.live.com/signup.aspx?id=60969
