I am in the initial stages of having a set of Alon no muffler straight pipes 
made up for my 415C in stainless steel, I have spoken to a person that has the 
jigs.  Since there is a price break in quantity, if anyone else is interested 
in a set please email me.

--- In [email protected], iflysmo...@... wrote:
>
> Hey Ron: I doubt it since it only gets the heat from one side of the  
> engine. They used two springs wrapped around the stack, inside the heat muff, 
> to  
> slow down the air flow and increase the heat for the RH (carb heat) side. I 
> have  put the spings inside the LH stack to increase the heat output.
> Lynn
>  
> In a message dated 5/8/2010 7:12:22 P.M. Eastern Daylight Time,  
> cou...@... writes:
> 
> Does the  cabin heat put out as much heat in winter as the regular ercoupe 
> system did  Ron Kline
> 
> 
> ---- iflysmo...@... wrote: 
> > Hey Don: I am  attempting to attach a copy of one of the 337's for Alon  
> >  exhaust on an Ercoupe
> > Lynn Nelsen
> >  
> >   
> > In a message dated 5/8/2010 10:00:11 A.M. Eastern Daylight  Time,  
> > dongen...@... writes:
> > 
> > 
> >  
> > Fantastic!  Would it be possible to get a copy of the   337?
> > 
> > --- In [email protected],  Iflysmodel@  wrote:
> > >
> > > Yes Don: I have put Alon  exhaust on several 415's with  337 approval. 
> In  
> > > fact,  Skyport was using my information to  obtain an STC when the guy 
> (I  
> > am  
> > > terrible about remembering  names)  working Skyport at American 
> Champion 
> > had a  
> > >  stroke. I do  not believe the STC was ever finished.
> > > Lynn  Nelsen
> > >   
> > >  
> > > In a message  dated 5/8/2010 8:59:25 A.M. Eastern  Daylight Time,  
> > >  DonGeneda@ writes:
> > > 
> > > 
> > >  
> >  > I would like to dump the mufflers on my 415C, has anybody   done  it 
> and 
> > got 
> > > it approved?
> > >  
> > > --- In  [email protected],  William R.  Bayne <ercoguru@>  
> > wrote:
> > > >
> > >  > 
> > > > Factory  Alon exhaust  stacks are unmuffled  (no mufflers).
> > > > 
> > > > They do  have   heat muffs on each...one for carb heat, one for cabin 
> > heat.
> >  >  > 
> > > >  WRB
> > > > 
> > >  > -- 
> > > >  
> > > > On May 7, 2010, at  21:33,  JETSRGN@ wrote:
> > > >  
> > > >  >
> > > > >
> > > > > Mufflers on   both  sides
> > > > >  
> > > >
> > >  
> > > 
> > > 
> > >  
> > >  ------------------------------------
> > > 
> > >  Yahoo!   Groups  Links
> > >
> > 
> > 
> >  
> > 
> > ------------------------------------
> > 
> >  Yahoo!  Groups Links
> > 
> > 
> > 
> >
>


Reply via email to