Definitely not original! John --- On Mon, 6/14/10, Bill BIGGS <[email protected]> wrote:
From: Bill BIGGS <[email protected]> Subject: RE: [ercoupe-tech] $ 52,000 Ercoupe?? To: "ercoupe tech" <[email protected]> Date: Monday, June 14, 2010, 12:25 PM We put a Tripacer 150 FWF on the colt taildragger and that sure cured the performance problem. Also saw a highly modified Taylorcraft converted to experimental with an O-320. The nose section of the wings had foam between the ribs and then fiberglas all around to form like a D-Spar, and the rest of the wing and ailerons also fiberglas. Think he made it stick, single seat. Seems it cruised at about 150 knots if I recall correctly. Bill To: ercoupe-tech@ yahoogroups. com From: johnkuhfahl@ yahoo.com Date: Mon, 14 Jun 2010 08:29:13 -0700 Subject: RE: [ercoupe-tech] $ 52,000 Ercoupe?? Bill, I have the Colt too! My son is finishing up his private in that now--love that one too--have over 500 hrs in it. 4.5 gph, but it is a dog on static and cilmb-out. The T-Craft BC12D was a great project. That A65 I rebuilt is a true "clock." My customer is so happy. John --- On Mon, 6/14/10, Bill BIGGS <webacr...@msn. com> wrote: From: Bill BIGGS <webacr...@msn. com> Subject: RE: [ercoupe-tech] $ 52,000 Ercoupe?? To: "ercoupe tech" <ercoupe-tech@ yahoogroups. com> Date: Monday, June 14, 2010, 8:46 AM Small world, I have restored 2 BC-12D Talorcrafts and did a Colt and a Tripacer 22-20 conversions. Bill To: ercoupe-tech@ yahoogroups. com CC: kuhlcou...@gmail. com From: johnkuhfahl@ yahoo.com Date: Mon, 14 Jun 2010 06:26:58 -0700 Subject: RE: [ercoupe-tech] $ 52,000 Ercoupe?? [1 Attachment] [Attachment(s) from john kuhfahl included below] Bill and all, I agree. I went to an event a few months ago and my "Coupe" was the center of attraction. The old Pipers and Cesnas, RV's and other new LSAs are in my mind boring. That said, I just spent 4-months on a 1946 Taylorcraft, am restoring a PA 20 and would like to build a Zenith 750 I love "em all--but my fully-restored Ercoupe with a zero-time engine is the best! Hey, I think I will go fly! John N2138H --- On Mon, 6/14/10, Bill BIGGS <webacr...@msn. com> wrote: From: Bill BIGGS <webacr...@msn. com> Subject: RE: [ercoupe-tech] $ 52,000 Ercoupe?? To: "ercoupe tech" <ercoupe-tech@ yahoogroups. com> Date: Monday, June 14, 2010, 7:05 AM Jerry and all, It all comes down to "beauty is in the eye of the beholder". For your commercial use a new LSA is the way to go. For many of us, as this forum proves, more than half the fun is tinkering. I wholeheartedly agree, if you like to tinker the Ercoupe is for you. If you just want to fly and not be bothered a new plane is probably better. (or an Ercoupe with an A&P on retainer) Bill To: ercoupe-tech@ yahoogroups. com From: JEichenberger@ ehlawyers. com Date: Mon, 14 Jun 2010 07:37:40 -0400 Subject: RE: [ercoupe-tech] $ 52,000 Ercoupe?? I'll take a different tack on the question of full-blown restorations. I've been through it twice - back 20 years ago with a Comanche and about 4 years ago with a Champ. I've learned my lesson and won't do it again. No matter how thoroughly you may think an airplane has been restored, the final product is still not a new airplane. It still takes the constant maint. one would expect of a used machine 60 years old. Owning an FBO with a flight school has taught me a valuable lesson - new is always better. When you have a restoration that you're actually trying to use as an everyday airplane, thinks still break with the same frequency you'd expect from components and parts that are 60 years old. If one can afford it, there is no substitute for new. Consider than with a new airplane, you ought to get about 1,000 hours of flight before anything major needs to be replaced, fixed in a major way, or overhauled. That 1,000 hours should be just routine oil changes, tires and brakes, and very little else. We have a new Tecnam Eaglet in our training/rental fleet - it currently has about 200 trouble free hours on it. And, it's about 20% faster than any of the classic airplanes that are LSA eligible, and that makes a huge difference when flying into a 20 knot wind on a trip. Of course, new gets you the latest avionics and other equipment. As an old dog who threw bones at Rotax engines for years, operating this airplane has completely changed my mind. The Rotax is a great engine, and is so simple to operate and maintain with its altitude compensating carbs that have no mixture control, electronic ignition, etc., etc. A couple of weeks ago I personally took the airplane on a 3 hour trip. It burned 4.56 gph while cruising at 110 Knots, or in excess of 125 mph. No classic will do that. Rate of climb with one person is often around 1400 fpm, and about 1,000 fpm with two aboard and full fuel. No classic with do that either. Before I'd ever put $50K in a classic restoration again, I'd get a partner or two, and have each put the same money in a new airplane with all of the bells and whistles, and enjoy years of trouble free flying. Just my opinion, but one that comes from experience. Jerry E. -----Original Message----- From: ercoupe-tech@ yahoogroups. com [mailto:ercoupe- t...@yahoogroups .com]On Behalf Of heave...@wt. net Sent: Friday, June 11, 2010 7:09 PM To: ercoupe-tech@ yahoogroups. com Subject: [ercoupe-tech] $ 52,000 Ercoupe?? http://cgi.ebay. com/ebaymotors/ 1946-Ercoupe- Light-Sport- /280518508821? cmd=ViewItem&pt=Motors_Aircraft&hash=item415034c115 A $ 52,000 Ercoupe ???!!! Eliacim The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail. Get busy. The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail. Get busy. Hotmail is redefining busy with tools for the New Busy. Get more from your inbox. See how.
