I have seen this with VPN software installed. If this is the case, try going to the Network Connections and disabling (not removing) the VPN software, re-start ethereal and see if this helps the situation.
Jim -----Original Message----- From: Guy Harris [mailto:[EMAIL PROTECTED] Sent: Thursday, July 31, 2003 1:59 PM To: Martin Heldmann Cc: [EMAIL PROTECTED] Subject: Re: [Ethereal-users] Outgoing packets are not shown On Thursday, July 31, 2003, at 3:34 AM, Martin Heldmann wrote: > My question: > I am using Ethereal at my home PC (and in the office). > The home PC has three interfaces (dialup(PPP), USB-Wlan and PCI > Ethernet card) > I want use the Wlan interface for a packet sniffing. > > My problem is that only the incoming packets are shown and not the > outgoing ones. What operating system is the PC running Ethereal running? If it's Windows, this is probably a WinPcap or driver problem, and you should contact the WinPcap developers to find out whether anything can be done. (It's probably a driver problem.) If it's Linux or BSD, it's probably a driver problem, and you should report it as a problem in the Linux distribution or BSD version you're using. _______________________________________________ Ethereal-users mailing list [EMAIL PROTECTED] http://www.ethereal.com/mailman/listinfo/ethereal-users
