On Dec 12, 2003, at 1:15 AM, Joseph Hsiao wrote:
I found a bug in Ethereal IPMI protocol that some IPMI command names do not
match those in IPMI specification:
NetFn � � � �CMD � � � �CMD name in spec. � � � � � � � �CMD name in Ethereal
==================================================================
S/E � � � �20h � � � �Get Device SDR Info � � � � � � � �Get SDR Repository Info
S/E � � � �23h � � � �Get Sensor Reading Factors � � � �Get SDR
Actually, that bug doesn't appear to be in the current CVS version.
Command codes are decoded by "get_netfn_cmd_text()", which takes a NetFn value and a CMD value as arguments.
If the NetFn value is 0x04 or 0x05, the CMD value is decoded with the "ipmi_se_cmd_vals[]" table, which has "Get Device SDR Info" for 0x20 and "Get Sensor Reading Factors" for 0x23.
Only if the NetFn value is 0x0a or 0x0b does it use the "ipmi_storage_cmd_vals[]" table, which has "Get SDR Repository Info" for 0x20 and "Get SDR" for 0x23, as it should, at least according to the 1.5 rev 1.1 IPMI spec.
If you have a capture that appears to show the wrong command name, check that the NetFn value is 0x04 or 0x05; if it is, send it to us, so we can figure out why the wrong table is being used.
_______________________________________________ Ethereal-users mailing list [EMAIL PROTECTED] http://www.ethereal.com/mailman/listinfo/ethereal-users
