I have a computer on a Cisco 2950 that has 2 nic cards 1 for network connectivity and 1 connected to an additional switch port that is setup for monitoring. This NIC has no subnet, no gateway, no ip address, and no dns addys. When I try to put host xxx.xxx.xxx.xxx in the capture filter I get nothing in the way of packets displayed.
When I erase that capture filter and then start with none and then put a ip.addr == xxx.xxx.xxx.xxx in the filter of the main window I get the packets just fine. I have also just tried giving the 2nd nic (set up for monitoring in the switch) a ip address gateway and subnet, and when I put host xxx.xxx.xxx.xxx in the caputre field I get only arp messages asking where the xxx.xxx.xxx.xxx is and to notify the 2nd nics address. Before we had a rag tag of diffent switches installed and it was never a problem worked great but since the installation of the Cisco 2950s this has been a issue. Please help. Thanks Rich _______________________________________________ Ethereal-users mailing list [EMAIL PROTECTED] http://www.ethereal.com/mailman/listinfo/ethereal-users
