Hi Florian, i found my (newbie-)mistakes. As the mini example started the numbering of the slaves with 1 i did it the same way, and i had absolutely no doubt that it will fit if its like in the example. So the master tried to configure slave in position 1 while there was only one slave on position 0. After that it worked and i was able to fix the remaining little things (corrupted frames, timed out frames,...).
Thank you for your patience. Regards Christian Florian Pose schrieb: > On Mon, Dec 08, 2008 at 03:52:33PM +0100, Christian Gieseler wrote: >> The syslog output tells me that the master fails to create the slave >> configuration. > > This is probably the problem. Which reason does it output? > >> Requesting the safeop state gives the syslog output : >> >> slave 0 refused state change (PREOP+ERROR), caused by an invalid sync >> manager configuration. > > This is reasonable, because if the slave has no configuration attached, > the Pdo sync managers will not be configured, which fits to your > descriptions. > >> P.S. Am i right on this mailing list, or should i post on the users list >> and sorry for posting to you directly. > > This is typically something for the users list, but don't break the thread > now. ;-) > _______________________________________________ etherlab-dev mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-dev
