Hi, Sorry for the formatting. Once again:
> Hi all, > > I wrote a message about integration ECAT blocks in Simulink on Windows a > couple > of weeks earlier, but with unprocessed result. However ones more, I try to > integrate EtherCAT lib in Simulink on Windows Platform, I already solved the > Problems with MEX-Compiler. So I can create models with ECAT blocks form > Etherlab lib. in Simulink without an error. I saw that the ECAT blocks are > written as S-Funktions in Simulink, but how the block communicate with the > Hardware? As I understand the C MEX S-Functions in Simulink, I just need to > switch the interface of the blocks from Eteherlab to my own. Because the > target > platform which we have is x86 and it exist a .tlc file for this in Simulink. > My > question is, which .tlc file from Etherlab lib have to be changed to get all > needed information for the blocks from my own initerface S-Function? > > Kind regards Andrej Mueller -- AFPT GmbH Trinkbornstraße 15-17 56281 Doerth Germany Phone: +49 6747 950185-0 | Fax: +49 6747 950185-9 | Url: www.afpt.de Amtsgericht Koblenz | HRB 20 638 | USt-IdNr. DE253125882 Geschäftsführer: Dr.-Ing. Patrick Kölzer, Frank-Andre Rittenbruch _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
