Hi etherlab list, while using etherlab on a Beckhoff Embedded PC I run into the following problem: after starting up the etherlab stack I only see the bus coupler connected: [ 2141.903652] EtherCAT 0: Link state changed to UP. [ 2141.908051] EtherCAT 0: 1 slave(s) responding. [ 2141.908054] EtherCAT 0: Slave states: PREOP.
When using my notebook with the same etherlab setup I see all slaves connected: [44744.672539] EtherCAT 0: 4 slave(s) responding. [44744.672542] EtherCAT 0: Slave states: PREOP. The only difference I see is the Embedded PC having an e100 while my notebook has an e1000e network card. But I use the generic driver on both machines, so this shouldn't make a difference. I run the latest development branch of etherlab with a 2.6.32 kernel. Any idea what I'm doing wrong or how I can further debug the problem? Thanks in advance. Alex -- Dipl.-Ing. Alexander Bubeck Fraunhofer IPA, Abteilung Robotersysteme Nobelstra�e 12, 70569 Stuttgart, Germany Telefon: +49 (0) 711 970-1314 Fax: + 49 (0) 711 970-1008 [email protected] http://www.ipa.fraunhofer.de
_______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
