Hello
I am using the Realtek RTL8111/8168B network chip, and a vanilla kernel 2.6.29.6 with the realtime patch rt24. We have problems with the realtek driver from kernel.org and we want to use the network driver from realtek itself (see http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1 <http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFi d=5&Level=5&Conn=4&DownTypeID=3&GetDown=false> &PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false). So I have two questions : 1) Is there a network patch for the IGH Ethercat master, based on the realtek network driver mentioned above 2) Is there more info about 'how to patch a network device' beside section 4.5 Patching Network Drivers, in the ethercat document. Kind regards Peter van Knippenbergh Test and Software designer ------------------------------------------__________________________________ ___________________________ Sioux. Source of your development. Sioux Embedded Systems B.V. Esp 405 | 5633 AJ Eindhoven | The Netherlands KvK Eindhoven 17093039 T +31 (0)40 2677100 T +31 (0)40 2677108 (direct) F +31 (0)40 2677101 E <mailto:[email protected]> [email protected] Visit us at: www.sioux.eu e-mail <mailto:[email protected]> [email protected] "Sioux, the embedded systems specialists adding (more) value" DISCLAIMER: De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt, wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail.
_______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
