Hello Mr. Crauwels,
EL3702: oversampling, use of dc, supported by master, already tested
EL3068: supported, we did not test it , but should be no problem
EL1252: oversampling, use of dc, supported by master, we did not test it
, but should be no problem
EL1014: supported
EK1100:supported
EL9011: is no slave
EL4002: supported
EL2024: supported, we did not test it , but should be no problem
It should also be no problem to use the slaves in Simulink Etherlab with
the generic slave block
Greatings
Andreas
Bart Crauwels schrieb:
Hello Andreas,
Thanks for the quick replay. The salves that we would use are
EL3702
EL3068
EL1252
EL1014
EK1100
EL9011
EL4002
EL2024
Greetings Bart
Op 21/10/2010 11:39, Andreas Stewering-Bone schreef:
Hello Mr Crauwels,
Our etherlab master generally supports all slaves. If you have a
special slave please ask.
Greatings
Andreas
Bart Crauwels schrieb:
Hello,
I have a short question. Is there a recent list of all the compatible
modules. If there is, where can I find it?
Kind regards,
Bart Crauwels
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
--
------------------------------------------------------------------------
Dipl.-Ing. Andreas Stewering-Bone Amtsgericht Essen HRB 11500
Ingenieurgemeinschaft IgH USt-Id.-Nr.: DE 174 626 722
Gesellschaft für Ingenieurleistungen mbH Geschäftsführung:
Heinz-Bäcker-Str. 34 Dr.-Ing. S. Rotthäuser
D-45356 Essen Dr.-Ing. T. Finke
Tel.: +49 201 / 360-14-15 Dr.-Ing. W. Hagemeister
Fax.: +49 201 / 360-14-14 Tel.: +49 201 / 360-14-0
[email protected] http://www.igh-essen.com
------------------------------------------------------------------------
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
