Hello all, Has someone an idea how to make the generic driver work for my Hardware ?
[14849.144284] EtherCAT 0: Link state changed to UP. [14849.145427] EtherCAT 0: 4 slave(s) responding. [14849.145436] EtherCAT 0: Slave states: SAFEOP. [14849.145543] EtherCAT 0: Scanning bus. [14849.145800] EtherCAT ERROR 0-0: Reception of SII read datagram failed: No response. [14849.145813] EtherCAT ERROR 0-0: Failed to determine SII content size: Reading word offset 0x0040 failed. Assuming 64 words. [14849.145857] EtherCAT ERROR 0-0: Reception of SII read datagram failed: No response. [14849.145867] EtherCAT ERROR 0-0: Failed to fetch SII contents. [14849.146561] EtherCAT ERROR 0-1: Reception of SII read datagram failed: No response. [14849.146573] EtherCAT ERROR 0-1: Failed to determine SII content size: Reading word offset 0x0040 failed. Assuming 64 words. [14849.146616] EtherCAT ERROR 0-1: Reception of SII read datagram failed: No response. [14849.146625] EtherCAT ERROR 0-1: Failed to fetch SII contents. [14849.146867] EtherCAT ERROR 0-2: Reception of SII read datagram failed: No response. [14849.146878] EtherCAT ERROR 0-2: Failed to determine SII content size: Reading word offset 0x0040 failed. Assuming 64 words. [14849.146921] EtherCAT ERROR 0-2: Reception of SII read datagram failed: No response. [14849.146930] EtherCAT ERROR 0-2: Failed to fetch SII contents. [14849.147208] EtherCAT ERROR 0-3: Reception of SII read datagram failed: No response. [14849.147219] EtherCAT ERROR 0-3: Failed to determine SII content size: Reading word offset 0x0040 failed. Assuming 64 words. [14849.147765] EtherCAT ERROR 0-3: Reception of SII read datagram failed: No response. [14849.147775] EtherCAT ERROR 0-3: Failed to fetch SII contents. [14849.147782] EtherCAT 0: Bus scanning completed in 2 ms. Used Ethernet device id: bridge description: Ethernet interface product: MCP51 Ethernet Controller vendor: nVidia Corporation physical id: 14 bus info: p...@0000:00:14.0 logical name: eth0 version: a3 serial: 00:1b:24:4d:14:b5 size: 100000000 capacity: 100000000 width: 32 bits clock: 66MHz capabilities: bridge pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation = on broadcast = yes driver = forcedeth driverversion = 0.64 duplex = full ip = xxx.xxx.xxx.xxx latency = 0 link = yes maxlatency = 20 mingnt = 1 multicast = yes port = MII speed = 100MB/s resources: irq : 20 memory : b0008000-b0008fff ioport : 30e0(size=8) _______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users
