Hello Wilhelm,
thank you for your fast answer, we'll take it into account. Could you
tell me which kind of problems have you found working with Intel NICs?
Thank you!
Quoting "Dr.-Ing. Wilhelm Hagemeister" <[email protected]>:
Hello Jordi,
yes an e1000e driver is available in newer EtherCat Master versions but
we recommend to NOT use a INTEL-Nic for EtherCat (if possible). We have
best experience with the Realtek chipsets due to the fact that these are
the "stupid" chips which you need for good realtime performance.
Wilhelm.
Am 21.09.2011 09:17, schrieb Jordi Blanch Carles:
Dear all,
we are considering to use EtherLab Master for a real time control
application with Ethercat and RTAI, but as new embedded PCs are quite
difficult to find with an e1000 driver compatible ethernet device, I was
wondering if a the e1000e driver contained into EtherLab Master sources
is usable in such a combination (RTAI + EtherLab Master).
Thank you very much!
Jordi Blanch Carles
Unidad de Ensayo y Control
ENCOPIM S.L.
C/. del Parc, 5 (nave 13)
P.I. Els Pinetons
E-08291 RIPOLLET (Barcelona)
Tel: (+34) 935 94 23 47
Fax: (+34) 935 94 64 15
==========================================================
La información contenida en la presente transmisión es confidencial y su
uso únicamente está permitido a su(s) destinatario(s). Si Ud. no es la
persona destinataria de la presente transmisión, rogamos nos lo
comunique de manera inmediata por teléfono (+34 935 942 347) y destruya
cualquier copia de la misma (tanto digitales como en papel).
The information contained in this transmission is confidential and is
intended only for the use of the addressee(s). If you are not the
designated recipient of this transmission, please advise us immediately
by telephone (+34 935 942 347) and destroy any copies (digital and
paper).
======================================================
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
Jordi Blanch Carles
Unidad de Ensayo y Control
ENCOPIM S.L.
C/. del Parc, 5 (nave 13)
P.I. Els Pinetons
E-08291 RIPOLLET (Barcelona)
Tel: (+34) 935 94 23 47
Fax: (+34) 935 94 64 15
==========================================================
La información contenida en la presente transmisión es confidencial y su
uso únicamente está permitido a su(s) destinatario(s). Si Ud. no es la
persona destinataria de la presente transmisión, rogamos nos lo
comunique de manera inmediata por teléfono (+34 935 942 347) y destruya
cualquier copia de la misma (tanto digitales como en papel).
The information contained in this transmission is confidential and is
intended only for the use of the addressee(s). If you are not the
designated recipient of this transmission, please advise us immediately
by telephone (+34 935 942 347) and destroy any copies (digital and
paper).
======================================================
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
