Hi,
After looking in the structure
static DEFINE_PCI_DEVICE_TABLE(rtl8139_pci_tbl)
I have seen that the RT8139D chip is supported.
Therefore I have bought a Trendnet TE100-PCIWIN network card
with a RT8139D chip (it is a very cheap device ~ 7 euros)
and it runs very well with the ec_8139too driver.
Thank you
---
sebastien
On 11/07/2011 03:06 PM, Andreas Stewering-Bone wrote:
Hello,
Have a look at the PCI ID of your chip
and look into the specific driver for your kernel.
The ID has to be inside the structure
static DEFINE_PCI_DEVICE_TABLE(rtl8139_pci_tbl) = {...}
at the beginning of the driver file.
Best regards
Andreas
Am 07.11.2011 14:54, schrieb Sebastien BLANCHET:
Hi,
Does the Etherlab 8139too driver work with the RTL8139D chip ?
More details:
According to the mailing list archives, the easier driver for Etherlab
EtherCAT master is the 8139too. This driver is for the Realtek 8139C family.
Nevertheless, it seems that the RTL8139C is not produced anymore,
Today it is easier to buy a NIC with RTL8139D chip
For example:
- Trendnet TE100-PCIWIN
- TP-Link TF-3239D
If I want to run the Etherlab 8139too driver:
- Can I buy a new NIC with a RTL8139D chip ?
- Or should I try to find an old NIC with a RTL8139C chip on Ebay ?
Thank you very much for your help
---
sebastien
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
Mit freundlichem Gruß
Andreas Stewering-Bone
--
Sebastien BLANCHET
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
