Hello Mike,
You can use this boxes with the Intel Chipset.
But what do you want to do,
control a mechanical system, you will need cylcletimes about 1kHz
mechanical measuring, max 4kHz I think
also with an atom board you can reach max up to 10 kHz, but this depends
on your software.
You said, you build up an userspace example.
Did you check on overruns in the software (latency of the system)?
Greatings
Andreas
Am 22.03.2012 13:11, schrieb Mike O'Connor:
Hi Andreas
On 22/03/12 7:30 PM, Andreas Stewering-Bone wrote:
Hello Mike
Please use ether etherlab-user mailing list for such things.
I did and got no response and it was holding up our project to develop
an open source system which uses an event/state design without having to
use the upper level tools in the Etherlab system. (nothing against the
Etherlab system but it is just to complicated for our needs)
Thanks for the information, wish I had known this earlier as I have all
ready purchased some sweet 6 port atom embedded boxes for the project.
O well, live and learn.
Mike
Mit freundlichem Gruß
Andreas Stewering-Bone
--
------------------------------------------------------------------------
Dipl.-Ing.(FH) Andreas Stewering-Bone
[email protected]
Tel.: +49 201 / 36014-15
Ingenieurgemeinschaft IgH
Gesellschaft für Ingenieurleistungen mbH
Heinz-Bäcker-Str. 34
D-45356 Essen
Amtsgericht Essen HRB 11500
USt-Id.-Nr.: DE 174 626 722
Geschäftsführung:
- Dr.-Ing. S. Rotthäuser,
- Dr.-Ing. T. Finke,
- Dr.-Ing. W. Hagemeister
Tel.: +49 201 / 360-14-0
http://www.igh-essen.com
------------------------------------------------------------------------
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
