Can you send a dmesg output? I only briefly experimented with the tty
demo - it worked for me, right out of the box.
On 09/02/12 06:55, Parthasarathy S wrote:
Hello Matthieu,
EL6002 is present in the bus.
`ethercat slaves` shows that EL6002 is present.
Regards
Partha
On Sat, Sep 1, 2012 at 7:03 PM, Matthieu Bec <[email protected]
<mailto:[email protected]>> wrote:
Hello Parthasarathy,
do you have an EL6002 present in your bus? the demo scans all the
slaves and only create /dev/tty's when it finds suitable devices.
> I assume it should be
> `/etc/init.d/ethercat start`
yes, typo in the readme
Matthieu
On 08/31/12 18:31, Parthasarathy S wrote:
Hello,
I am trying out the tty example. I've enabled it with
--enable-tty option.
One of the steps in the tty/README file is to run the command
`rcethercat start`
There is no such command. I assume it should be
`/etc/init.d/ethercat start`
There is no error in other steps.
I notice that /dev/ttyEC0 is not created.
Can someone help.
Thanks and best regards
--
Parthasarathy S
C612 Sena Vihar
Kammanahalli Main Road
Bangalore 560043 India
_________________________________________________
etherlab-users mailing list
[email protected] <mailto:[email protected]>
http://lists.etherlab.org/__mailman/listinfo/etherlab-__users
<http://lists.etherlab.org/mailman/listinfo/etherlab-users>
--
Matthieu Bec GMTO Corp.
cell: +1 626 354 9367 P.O. Box 90933
phone: +1 626 204 0527 Pasadena, CA 91109-0933
--
Parthasarathy S
C612 Sena Vihar
Kammanahalli Main Road
Bangalore 560043 India
--
Matthieu Bec GMTO Corp.
cell: +1 626 354 9367 P.O. Box 90933
phone: +1 626 204 0527 Pasadena, CA 91109-0933
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
