On Thu, 2013-01-17 at 12:22 +0100, vilian...@sina.com wrote: > Hello,Raz > I have also used your vitrual slaves in kernel space. > In one pc, I just start the etherlab master(sudo /etc/init.d/ethercat > start), > then in another pc,I insmod ecslave.ko with rxmac=XX:XX:XX:XX:XX:XX(in > this pc, i did not start ethercat master) > I want to get some of the slave's infomation, so I just set command: > ethercat sl in first pc, but I got nothing. > I also compile code in virtual_slave and start it in first pc.but got > nothing. > I using ethercat master command to test ethercat frames, and found all > frames are lost and the master can not get > responsed frames. > Can you give me some suggestions? > Thank you in advance! > vilian_ch
first test if it runs in user space. let us check if traffic reaches the slave pc. > > ----- 原始邮件 ----- > 发件人:etherlab-users-requ...@etherlab.org > 收件人:etherlab-users@etherlab.org > 主题:etherlab-users Digest, Vol 68, Issue 7 > 日期:2013年01月17日 19点00分 > > > -- https://sites.google.com/site/ironspeedlinux/ _______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users