Sorry, at the moment e100 is only supported for kernel 3.4 natively.
Your luck may vary using the generic driver, but as you see it is broken
for 3.8 (VM_RESERVED is not defined any more in 3.8).
You will need to drop down to earlier versions unfortunately.
Am 11/05/2013 06:24 AM, schrieb Muhammad Nabeel:
Dear Thomas,
Thank you for your reply,
I disable the 8139toodriver and enable generic driver then I run make
command and after "make" I run "make modules" but it is giving me this
error.
nabeel@ubuntu:~/ethercat-default$ make modules
make -C "/usr/src/linux-headers-3.8.0-31-generic"
M="/home/nabeel/ethercat-default" modules
make[1]: Entering directory `/usr/src/linux-headers-3.8.0-31-generic'
CC [M] /home/nabeel/ethercat-default/master/cdev.o
/home/nabeel/ethercat-default/master/cdev.c: In function
‘ec_cdev_ioctl_slave_sdo_upload’:
/home/nabeel/ethercat-default/master/cdev.c:864:13: warning: passing
argument 7 of ‘ecrt_master_sdo_upload’ from incompatible pointer type
[enabled by default]
/home/nabeel/ethercat-default/master/../include/ecrt.h:758:5: note:
expected ‘size_t *’ but argument is of type ‘uint32_t *’
/home/nabeel/ethercat-default/master/cdev.c: In function ‘eccdev_mmap’:
/home/nabeel/ethercat-default/master/cdev.c:3964:22: error:
‘VM_RESERVED’ undeclared (first use in this function)
/home/nabeel/ethercat-default/master/cdev.c:3964:22: note: each
undeclared identifier is reported only once for each function it appears in
make[3]: *** [/home/nabeel/ethercat-default/master/cdev.o] Error 1
make[2]: *** [/home/nabeel/ethercat-default/master] Error 2
make[1]: *** [_module_/home/nabeel/ethercat-default] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-3.8.0-31-generic'
make: *** [modules] Error 2
Please help me how can I fix this issue, actually I am new to Ubuntu and
EtherCAT that's why I am facing some problems.
Thank you.
------------------------------------------------------------------------
From: [email protected]
To: [email protected]
CC: [email protected]
Subject: Re: [etherlab-users] configure: error: kernel 3.8 not available
for 8139too driver!
Date: Tue, 5 Nov 2013 05:07:36 +0000
On 3.8, you'll need the generic driver. There's a flag to disable the
8139too driver. It's enabled by default. You'll also need to enable the
generic driver. See the PDF manual for all build flags.
If you want to use a hardware driver (recommended), you'll need to drop
down to an earlier kernel.
(Sent from my mobile device.)
On Nov 4, 2013, at 10:51 PM, "Muhammad Nabeel"
<[email protected] <mailto:[email protected]>> wrote:
Dear All, Hope you are doing well.
I am trying to install IgH EtherCAT master in Ubuntu 12.04, but when
I run ./configuration it is giving "error configure: error: kernel
3.8 not available for 8139too driver!".
Do you have any idea how can I fix this problem?
Thank you guys in advance.
_______________________________________________
etherlab-users mailing list
[email protected] <mailto:[email protected]>
http://lists.etherlab.org/mailman/listinfo/etherlab-users
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
Mit freundlichem Gruß
Richard Hacker
--
------------------------------------------------------------------------
Richard Hacker M.Sc.
[email protected]
Tel.: +49 201 / 36014-16
Ingenieurgemeinschaft IgH
Gesellschaft für Ingenieurleistungen mbH
Heinz-Bäcker-Str. 34
D-45356 Essen
Amtsgericht Essen HRB 11500
USt-Id.-Nr.: DE 174 626 722
Geschäftsführung:
- Dr.-Ing. T. Finke,
- Dr.-Ing. W. Hagemeister
Tel.: +49 201 / 360-14-0
http://www.igh-essen.com
------------------------------------------------------------------------
Mit freundlichem Gruß
Richard Hacker
--
------------------------------------------------------------------------
Richard Hacker M.Sc.
[email protected]
Tel.: +49 201 / 36014-16
Ingenieurgemeinschaft IgH
Gesellschaft für Ingenieurleistungen mbH
Heinz-Bäcker-Str. 34
D-45356 Essen
Amtsgericht Essen HRB 11500
USt-Id.-Nr.: DE 174 626 722
Geschäftsführung:
- Dr.-Ing. T. Finke,
- Dr.-Ing. W. Hagemeister
Tel.: +49 201 / 360-14-0
http://www.igh-essen.com
------------------------------------------------------------------------
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
