Hi, I am trying to set up the EtherLab master on a PC that has two Intel NICs: 1 x 82566DM-2 (which I am using for normal network traffic) and 1 x 82573L which I am trying to use for EtherCAT. The PC is running Linux 3.4.69 with the RT patch applied. I configured the master using "./configure --disable-8139too --enable-e1000e". After making and installing the master I modified /etc/sysconfig/ethercat specifying the MAC address for the 82573L and "e1000e" as the device module. When I start the service I see no flashing LEDs on my EtherCAT slave (Beckhoff EK1100 plus a couple of terminals). The following is in the system log:
Nov 27 15:05:07 (none) kernel: [ 6972.273067] EtherCAT: Master driver 1.5.2 unknown Nov 27 15:05:07 (none) kernel: [ 6972.273537] EtherCAT: 1 master waiting for devices. Nov 27 15:05:07 (none) ethercat[22728]: Starting EtherCAT master 1.5.2 ..done Nov 27 15:05:07 (none) kernel: [ 6972.277191] ec_e1000e: EtherCAT-capable Intel(R) PRO/1000 Network Driver - 1.9.5-k-EtherCAT Nov 27 15:05:07 (none) kernel: [ 6972.277194] ec_e1000e: Copyright(c) 1999 - 2012 Intel Corporation. Running lsmod shows: Module Size Used by ec_e1000e 140582 0 ec_master 239804 1 ec_e1000e I assume I should be seeing more logging from ec_1000e? Does anyone have any ideas about what I am doing wrong? Thanks, Damien _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
