Thanks, problem solved! Simone.
Il 10/01/2014 13:36, Richard Hacker ha scritto: > Which version of EtherLab are you using? Do you have to load a kernel > module and require etherlab_buddy? > > If so, start etherlab_buddy with a larger buffer, e.g. > etherlab_buddy -b 10000000 > > - Richard > > Am 01/10/2014 09:46 AM, schrieb Simone Denei: >> Hello Everybody, >> >> I'm a researcher at the University of Genova and I'm working on a test >> platform for our experiments. The platform has the same structure of a >> CNC machine plus a number of sensors that record the experiment. I'm >> developing the control process using Simulink and I'm controlling the >> platform using an interface developed in Testmanager. Until yesterday >> everything works fine. As soon as I add to the Simulink model another >> slave, I cannot see the parameters list in Testmanager anymore and I >> cannot control the platform. This also happens if I add to the Simulink >> model a big signal (let's say a signal of 100 elements). I think I've >> overreached the maximum number of parameters that can be effectively >> controlled by Testmanager (the simulink model is quite complex). >> Is there any solution to this problem? >> >> Thanks in advance. >> >> Simone Denei. >> _______________________________________________ >> etherlab-users mailing list >> [email protected] >> http://lists.etherlab.org/mailman/listinfo/etherlab-users >> > > Mit freundlichem Gruß > > Richard Hacker > _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
