Hello Thomas,
Just a wild guess, are you adjusting for EtherCAT time EPOCH? I have something
like:
static inline uint64_t TIMESPEC2NSEPOCH2000(struct timespec ts)
{
return (ts.tv_sec - 946684800ULL) * 1000000000ULL + ts.tv_nsec;
}
Regards,
Matthieu
On 2/19/16, 4:08 PM, "etherlab-users on behalf of Thomas Bitsky Jr"
<etherlab-users-boun...@etherlab.org on behalf of t...@automateddesign.com>
wrote:
Hello.
I’ve been using the EtherCAT master for years to great success, but I’m stuck
on a problem I can’t figure out that I think several people here are doing
successfully. I can’t implement distributed clocks in my application.
I am having the same problem on two systems I have up and running:
SYSTEM ONE:
EtherLAB Master 1.52, E1000E Driver, Scan Rate 4Khz, Ubuntu Server 14.04LTS,
RT-PREEMPT 3.12.50-rt68
alias=0, position=0, device=EK1100
alias=0, position=1, device=EL1104
alias=0, position=2, device=EL2004
alias=0, position=3, device=EL9510
alias=0, position=4, device=EL3356
alias=0, position=5, device=Kollmorgen AKD
alias=0, position=6, device=MTS LVDT
SYSTEM TWO:
EtherLAB Master 1.52, E1000E Driver, Scan Rate 8Khz, Ubuntu Server 14.04LTS,
RT-PREEMPT 3.12.50-rt68
alias=0, position=0, device=EK1100
alias=0, position=1, device=EL3001
alias=0, position=2, device=EL1104
alias=0, position=3, device=EL1104
alias=0, position=4, device=EL1104
alias=0, position=5, device=EL2004
alias=0, position=6, device=EL2004
alias=0, position=7, device=EL9505
alias=0, position=8, device=EL7041
alias=0, position=9, device=EL7041
alias=0, position=10, device=EL7041
alias=0, position=11, device=EL7041
alias=0, position=12, device=EL7041
alias=0, position=13, device=EL7041
alias=0, position=14, device=EK1110
alias=1, position=0, device=SIGMA5-05
alias=2, position=0, device=Yaskawa SIGMA5-05
alias=3, position=0, device=Yaskawa SIGMA5-05
Both of the system are fully operational. However, for various reasons, I need
to implement distributed clocks on these systems. I’ve never been able to get
this to work.
What follows is the code I used for both systems to try this. I read through
examples on the mailing list, plus the examples, but I’m not seeing what I’m
doing wrong. The result is always the same: all the fieldbus cards go into
operation, but the servo
drives won’t because of “bad configuration.” Take out the distributed clock
code, and they work fine. I’m getting away with it for now, but I do need
better clock resolution.
The systems have an LRW domain, then a separate read domain and write domain
for the servo drive(s) for a total of three domains (LRW, read, write). The
yaskawa drives necessitate this. The scan rate is usually 4Khz, but I have
tried it at both 1Khz and
8Khz and gotten the same results. Everything about the implementation is
fairly straight-forward. There’s just something fundamental about the DC
configuration that I’m not understanding.
Almost all the code below is taken right from the examples or the message
boards (thanks, everybody!). If anyone could tell me what I’m going wrong or
offer any insights, it’s greatly appreciated. For brevity, I tried to narrow it
down to relevant parts,
but please let me know any additional information or code I can provide.
Thank you in advance,
Tom
**********************************************************
// EtherCAT distributed clock variables
#define DC_FILTER_CNT 1024
#define SYNC_MASTER_TO_REF 1
static uint64_t dc_start_time_ns = 0LL;
static uint64_t dc_time_ns = 0;
static uint8_t dc_started = 0;
static int32_t dc_diff_ns = 0;
static int32_t prev_dc_diff_ns = 0;
static int64_t dc_diff_total_ns = 0LL;
static int64_t dc_delta_total_ns = 0LL;
static int dc_filter_idx = 0;
static int64_t dc_adjust_ns;
static int64_t system_time_base = 0LL;
static uint64_t wakeup_time = 0LL;
static uint64_t overruns = 0LL;
/** Get the time in ns for the current cpu, adjusted by system_time_base.
*
* \attention Rather than calling rt_get_time_ns() directly, all application
* time calls should use this method instead.
*
* \ret The time in ns.
*/
uint64_t system_time_ns(void)
{
struct timespec ts;
clock_gettime(GLOBAL_CLOCK_TO_USE, &ts);
return TIMESPEC2NS(ts);
}
static
void sync_distributed_clocks(void)
{
uint32_t ref_time = 0;
uint64_t prev_app_time = dc_time_ns;
dc_time_ns = system_time_ns();
// set master time in nano-seconds
ecrt_master_application_time(master_, dc_time_ns);
// get reference clock time to synchronize master cycle
ecrt_master_reference_clock_time(master_, &ref_time);
dc_diff_ns = (uint32_t) prev_app_time - ref_time;
// call to sync slaves to ref slave
ecrt_master_sync_slave_clocks(master_);
}
/** Return the sign of a number
*
* ie -1 for -ve value, 0 for 0, +1 for +ve value
*
* \retval the sign of the value
*/
#define sign(val) \
({ typeof (val) _val = (val); \
((_val > 0) - (_val < 0)); })
/*****************************************************************************/
/** Update the master time based on ref slaves time diff
*
* called after the ethercat frame is sent to avoid time jitter in
* sync_distributed_clocks()
*/
static unsigned int cycle_ns = 1000000; // 1 millisecond
void update_master_clock(void)
{
// calc drift (via un-normalised time diff)
int32_t delta = dc_diff_ns - prev_dc_diff_ns;
prev_dc_diff_ns = dc_diff_ns;
// normalise the time diff
dc_diff_ns =
((dc_diff_ns + (cycle_ns / 2)) % cycle_ns) - (cycle_ns / 2);
// only update if primary master
if (dc_started) {
// add to totals
dc_diff_total_ns += dc_diff_ns;
dc_delta_total_ns += delta;
dc_filter_idx++;
if (dc_filter_idx >= DC_FILTER_CNT) {
// add rounded delta average
dc_adjust_ns +=
((dc_delta_total_ns + (DC_FILTER_CNT / 2)) / DC_FILTER_CNT);
// and add adjustment for general diff (to pull in drift)
dc_adjust_ns += sign(dc_diff_total_ns / DC_FILTER_CNT);
// limit crazy numbers (0.1% of std cycle time)
if (dc_adjust_ns < -1000) {
dc_adjust_ns = -1000;
}
if (dc_adjust_ns > 1000) {
dc_adjust_ns = 1000;
}
// reset
dc_diff_total_ns = 0LL;
dc_delta_total_ns = 0LL;
dc_filter_idx = 0;
}
// add cycles adjustment to time base (including a spot adjustment)
system_time_base += dc_adjust_ns + sign(dc_diff_ns);
}
else {
dc_started = (dc_diff_ns != 0);
if (dc_started)
{
// record the time of this initial cycle
dc_start_time_ns = dc_time_ns;
}
}
}
struct timespec dcTime_;
int
ecatMain_process(void* lp)
{
ecrt_master_receive(master_);
clock_gettime(CLOCK_REALTIME, &dcTime_);
ecrt_master_application_time(master_, TIMESPEC2NS(dcTime_));
ecrt_master_sync_reference_clock(master_);
ecrt_master_sync_slave_clocks(master_);
ecrt_domain_process(lrwDomainMgr_.domain);
ecrt_domain_process(noLrwWriteDomainMgr_.domain);
ecrt_domain_process(noLrwReadDomainMgr_.domain);
… // handle my business
// write application time to master
clock_gettime(CLOCK_REALTIME, &dcTime_);
ecrt_master_application_time(master_, TIMESPEC2NS(dcTime_));
if (sync_ref_counter_)
{
sync_ref_counter_--;
}
else
{
sync_ref_counter_ = 1; // sync every cycle
ecrt_master_sync_reference_clock(master_);
}
// send process data
ecrt_domain_queue(lrwDomainMgr_.domain);
ecrt_domain_queue(noLrwWriteDomainMgr_.domain);
ecrt_domain_queue(noLrwReadDomainMgr_.domain);
// sync distributed clock just before master_send to set
// most accurate master clock time
sync_distributed_clocks();
// send EtherCAT data
ecrt_master_send(master_);
// update the master clock
// Note: called after ecrt_master_send() to reduce time
// jitter in the sync_distributed_clocks() call
update_master_clock();
return 1;
}
int
ecatMain_start(void* lp)
{
//
// domain regs must end in a null entry
//
lrwDomainMgr_.domainRegs = realloc(
lrwDomainMgr_.domainRegs,
sizeof(ec_pdo_entry_reg_t) * (lrwDomainMgr_.size + 1) );
memset(
&(lrwDomainMgr_.domainRegs[lrwDomainMgr_.size]),
0,
sizeof(ec_pdo_entry_reg_t) );
noLrwReadDomainMgr_.domainRegs = realloc(
noLrwReadDomainMgr_.domainRegs,
sizeof(ec_pdo_entry_reg_t) * (noLrwReadDomainMgr_.size + 1) );
memset(
&(noLrwReadDomainMgr_.domainRegs[noLrwReadDomainMgr_.size]),
0,
sizeof(ec_pdo_entry_reg_t) );
noLrwWriteDomainMgr_.domainRegs = realloc(
noLrwWriteDomainMgr_.domainRegs,
sizeof(ec_pdo_entry_reg_t) * (noLrwWriteDomainMgr_.size + 1) );
memset(
&(noLrwWriteDomainMgr_.domainRegs[noLrwWriteDomainMgr_.size]),
0,
sizeof(ec_pdo_entry_reg_t) );
//
// NOTE: the Output Domain must be registered with
// ecrt_domain_reg_pdo_entry_list before the Input Domain otherwise you
// will not have any data exchanged even though the drive goes into OP
// mode.
//
PRINT("\nAttempting to register PDOs on WRITE ONLY domain...\n");
if (ecrt_domain_reg_pdo_entry_list(
noLrwWriteDomainMgr_.domain, noLrwWriteDomainMgr_.domainRegs))
{
PRINT("WRITE ONLY PDO entry registration failed!\n");
return FALSE;
}
PRINT("\nAttempting to register PDOs on READ ONLY domain...\n");
if (ecrt_domain_reg_pdo_entry_list(
noLrwReadDomainMgr_.domain, noLrwReadDomainMgr_.domainRegs))
{
PRINT("READ ONLY PDO entry registration failed!\n");
return FALSE;
}
//
// And now we register the bi-directional domain.
//
PRINT("\nAttempting to register PDOs on LRW domain...\n");
if (ecrt_domain_reg_pdo_entry_list(
lrwDomainMgr_.domain, lrwDomainMgr_.domainRegs))
{
PRINT("LRW PDO entry registration failed!\n");
return FALSE;
}
/*
* Finishes the configuration phase and prepares for cyclic operation.
* This function tells the master that the configuration phase
* is finished and the realtime operation will begin.
* The function allocates internal memory for the domains and calculates
* the logical FMMU addresses for domain members.
* It tells the master state machine that the bus configuration is
* now to be applied
*/
PRINT("\nAttempting to activate ECAT master...\n");
if (ecrt_master_activate(master_))
{
PRINT(
"%s Failed to activate master!\n",
__FUNCTION__ );
return FALSE;
}
/*
* Returns the domain's process data.
*/
PRINT( "%s getting LRW process data from master.\n", __FUNCTION__ );
if (!(lrwDomainMgr_.processData
= ecrt_domain_data(lrwDomainMgr_.domain)))
{
PRINT(
"%s set ecProcessData -- domain data is NULL!\n",
__FUNCTION__ );
return FALSE;
}
if (!(noLrwReadDomainMgr_.processData
= ecrt_domain_data(noLrwReadDomainMgr_.domain)))
{
PRINT(
"%s set read ProcessData -- domain data is NULL!\n",
__FUNCTION__ );
return FALSE;
}
if (!(noLrwWriteDomainMgr_.processData
= ecrt_domain_data(noLrwWriteDomainMgr_.domain)))
{
PRINT(
"%s set write ProcessData -- domain data is NULL!\n",
__FUNCTION__ );
return FALSE;
}
… // blah blah blah
doScan_ = TRUE;
PRINT( "%s completed successfully.\n", __FUNCTION__ );
return TRUE;
}
_______________________________________________
etherlab-users mailing list
etherlab-users@etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-users
