Hi at all In order to have the igb driver native for IGH ethercat, I have copied from etherlab repository the stable branch version with igb driver for 3.18 kernel. Currently I am using the 3.5.7 kernel, for this reason i have migrate the modifications in 3.18 on 3.5.7 driver (I hope .....) I am able to produce the .ko kernel module and I am able to use it (module ec_igb is loaded instead of igb module)
The problem is that the ethernet interface appear always down and the master can not work. Before master starts the interface is up, after master start became down have some one ideas about the problem ? Which are the driver functions probably involved in this problem ? At the moment I'm using the ec_generic driver, but is not the perfect solution with xenomai patch (there are many xenomai promary-secondary mode switch), on other hardware platform I'm using native driver with xenomai (ec_e1000e) and I have better performance respect to ec_generic regards, Antonio Righettini
_______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
