Update: The problem persists in the latest update from SourceForge. Best, Mohsen
On Mon, Oct 15, 2018 at 11:43 PM Mohsen Alizadeh Noghani < m.aliza...@gmail.com> wrote: > I should have also mentioned that I'm using kernel 3.4.6 and IgH EtherCAT > Master 1.5.2. > Best, > Mohsen > > On Mon, Oct 15, 2018 at 2:26 PM Mohsen Alizadeh Noghani < > m.aliza...@gmail.com> wrote: > >> Running the rtai_rtdm example hangs at "ecrt_master_activate". This >> happens in such a way that I can't even stop the process with a ctrl+c >> signal. >> *Additional info:* >> - Nothing out of ordinary in dmesg, the last message is, >> *EtherCAT successfully requested master 0.* >> - I'm using r8169 driver (the user example works fine) and RTAI 4.0. >> - I did receive two warnings when make ing the example, >> **** Warning: Linking the executable ec_rtai_rtdm_example against the >> loadable module.* >> **** liblxrt.so in not portable!* >> >> **** Warning: Linking the executable ec_rtai_rtdm_example against the >> loadable module* >> **** librtdm.so is not portable!* >> >> >> >>
_______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users