Hi Amos
Simulink/EtherLab depends heavily on pdserv. The versions you have
deployed are not compatible with one another.
I am also not convinced that you are using etherlab-2.1 from
etherlab.org, because the message block was not available in that version.
I am worried why you report having problems installing from
https://download.opensuse.org/repositories/science:/EtherLab/openSUSE_Leap_15.1/
That should work without problems. I only had warnings about unknown gpg
keys when installing software from the repository, but that seems to be
a problem with zypper.
# zypper ar
https://download.opensuse.org/repositories/science:/EtherLab/openSUSE_Leap_15.1/
etherlab
# zypper ref etherlab
# zypper in etherlab pdserv-devel
# /usr/share/etherlab/install.sh $MATLAB_ROOT
Do the usual Matlab installation from Matlab prompt:
>> run $MATLAB_ROOT/rtw/c/etherlab/setup_etherlab.m
Make sure there is nothing left over from previous pdserv-devel
installations, especially /usr/local/include/pdserv.h
Recompile your model and you should be set.
Mit freundlichem Gruß
Richard Hacker
--
------------------------------------------------------------------------
Richard Hacker M.Sc.
richard.hac...@igh.de
Tel.: +49 201 / 36014-16
Ingenieurgemeinschaft IgH
Gesellschaft für Ingenieurleistungen mbH
Heinz-Bäcker-Str. 34
D-45356 Essen
Amtsgericht Essen HRB 11500
USt-Id.-Nr.: DE 174 626 722
Geschäftsführung:
- Dr.-Ing. T. Finke,
- Dr.-Ing. W. Hagemeister
Tel.: +49 201 / 360-14-0
http://www.igh.de
------------------------------------------------------------------------
Am 25/02/2020 um 10.24 schrieb Merkel, Amos:
Hi Richard,
Thanks for helping me! You will find both files attached.
I tried the whole thing on two computers.
On one Computer, I have got installed:
pdserv version 1.1.0-lp151.4.1, pdserv-devel version 3.1.0-lp151.3.1
and etherlab-devel version 2.2.0-lp151.16.1 from the suse repository,
installing the etherlab package from the repo did result in some error during
installation, so I used the source from etherlab.org and compiled it manually -
I had completely forgotten about that. It is version 2.1. (according to the
NEWS file in the source directory)
The etherlab bundle on the second one is built manually and has got installed
pdserv version 1.1.0 and etherlab version 2.1
Greetings
Amos
_______________________________________________
etherlab-users mailing list
etherlab-users@etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-users
