Hej all.
I have recently run into a problem when I try to run a modified version
of the mini example code from the ethercat master.
After I insert the module the dmesg reads as follow:
[ 199.144403] ec_mini: module verification failed: signature and/or
required key missing - tainting kernel
[ 199.144434] ec_mini: no symbol version for ecrt_request_master
[ 199.145007] ec_mini: Starting...
[ 199.145012] EtherCAT: Requesting master 0...
[ 199.145017] EtherCAT: Successfully requested master 0.
[ 199.145019] ec_mini: Registering domain...
[ 199.145024] ec_mini: Configuring PDOs...
[ 199.145056] BUG: unable to handle kernel NULL pointer dereference at
00000008
[ 199.145080] IP: [<f8716501>] ecrt_slave_config_pdos+0x11/0x1f0
[ec_master]
[ 199.145084] *pdpt = 000000002c0bf001 *pde = 0000000000000000
[ 199.145085]
[ 199.145088] Oops: 0000 [#1] PREEMPT SMP
[ 199.145132] Modules linked in: ec_mini(OE+) nls_iso8859_1 usb_storage
ec_generic(O) ec_ccat_netdev(O) ec_master(O) ccat_update(O)
ccat_systemtime(O) ccat_sram(O) ccat_gpio(O) snd_hda_codec_hdmi
intel_rapl intel_powerclamp i915 coretemp kvm_intel kvm drm_kms_helper
irqbypass snd_hda_intel crc32_pclmul snd_hda_codec aesni_intel aes_i586
drm xts snd_hda_core lrw ablk_helper cryptd snd_hwdep snd_pcm joydev
serio_raw lpc_ich ccat(O) snd_timer snd shpchp fb_sys_fops syscopyarea
soundcore sysfillrect sysimgblt autofs4 video mac_hid lp parport igb
hid_generic usbhid hid i2c_algo_bit ptp pps_core ahci libahci sdhci_pci
sdhci [last unloaded: ccat_netdev]
[ 199.145137] CPU: 1 PID: 1740 Comm: insmod Tainted: G OE
4.9.219-rt142 #1
[ 199.145139] Hardware name: Beckhoff Automation GmbH & Co. KG
CX5130-0120/CX51x0, BIOS CX51x0 - 0.51 01/04/2017
[ 199.145141] task: ed22db40 task.stack: ec04e000
[ 199.145144] EIP: 0060:[<f8716501>] EFLAGS: 00010296 CPU: 1
[ 199.145163] EIP is at ecrt_slave_config_pdos+0x11/0x1f0 [ec_master]
[ 199.145165] EAX: 00000000 EBX: 00000000 ECX: f858e000 EDX: ffffffff
[ 199.145167] ESI: f8557000 EDI: ebc37180 EBP: ec04fdb0 ESP: ec04fd6c
[ 199.145169] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 199.145172] CR0: 80050033 CR2: 00000008 CR3: 2c0e4fa0 CR4: 001006f0
[ 199.145173] Stack:
[ 199.145181] 00000001 00000001 00000000 c10bfe2a 00000000 f8557000
ebc37180 ec04fda8
[ 199.145187] ffffffff f858e0d4 00000001 00000008 f858e0d4 00000000
00000000 f8557000
[ 199.145194] ebc37180 ec04fdc4 f855711f f858d278 03f03052 00000000
ec04fe34 c1002228
[ 199.145195] Call Trace:
[ 199.145204] [<c10bfe2a>] ? up+0x2a/0x40
[ 199.145207] [<f8557000>] ? 0xf8557000
[ 199.145211] [<f8557000>] ? 0xf8557000
[ 199.145217] [<f855711f>] init_module+0x11f/0x1000 [ec_mini]
[ 199.145223] [<c1002228>] do_one_initcall+0x38/0x150
[ 199.145228] [<c109a507>] ? migrate_enable+0x1b7/0x330
[ 199.145234] [<c117fee9>] ? free_hot_cold_page+0x329/0x380
[ 199.145237] [<c1195c05>] ? kvfree+0x45/0x50
[ 199.145241] [<c11b7810>] ? __vunmap+0x70/0xc0
[ 199.145244] [<c1176ad5>] ? do_init_module+0x24/0x1e2
[ 199.145247] [<c1176ad5>] ? do_init_module+0x24/0x1e2
[ 199.145251] [<c1176b04>] do_init_module+0x53/0x1e2
[ 199.145256] [<c11037e3>] load_module+0x20c3/0x26e0
[ 199.145262] [<c11ec5bb>] ? kernel_read_file+0x1fb/0x250
[ 199.145267] [<c1103fa2>] SyS_finit_module+0x82/0xd0
[ 199.145273] [<c10035c9>] do_fast_syscall_32+0x99/0x150
[ 199.145278] [<c179be93>] sysenter_past_esp+0x40/0x6a
[ 199.145333] Code: f8 89 44 24 04 e8 f6 01 a6 c8 b8 ea ff ff ff e9 67
ff ff ff 8d b6 00 00 00 00 55 89 e5 57 56 53 83 ec 38 3e 8d 74 26 00 89
45 f0 <8b> 40 08 89 55 dc 89 4d ec 8b b0 bc 13 00 00 85 f6 0f 85 8a 01
[ 199.145352] EIP: [<f8716501>]
[ 199.145353] ecrt_slave_config_pdos+0x11/0x1f0 [ec_master]
[ 199.145354] SS:ESP 0068:ec04fd6c
[ 199.145355] CR2: 0000000000000008
[ 199.150603] ---[ end trace 0000000000000002 ]---
As far as I can see it has something to do with my pdo configuration, as
it loads fine when I don’t use the modification, of course the pdo
config is wrong in that case but it runs further before it stops.
For reference my pdo config is attached:
#define AnaInSlavePos 0, 1
#define DigOutSlavePos 0, 2
#define Beckhoff_EL1008 0x00000002, 0x03f03052
#define Beckhoff_EL2008 0x00000002, 0x07d83052
// offsets for PDO entries
static unsigned int off_dig_in;
static unsigned int off_dig_out;
const static ec_pdo_entry_reg_t domain1_regs[] = {
{AnaInSlavePos, Beckhoff_EL1008, 0x1000, 1, &off_dig_in},
{DigOutSlavePos, Beckhoff_EL2008, 0x0f00, 2, &off_dig_out},
};
static unsigned int counter = 0;
static unsigned int blink = 0;
/*****************************************************************************/
#if CONFIGURE_PDOS
/* Master 0, Slave 0, "EL1008"
* Vendor ID: 0x00000002
* Product code: 0x03f03052
* Revision number: 0x00110000
*/
static ec_pdo_entry_info_t slave_0_pdo_entries[] ={
{0x6000, 0x01, 1}, /* Input */
{0x6010, 0x01, 1}, /* Input */
{0x6020, 0x01, 1}, /* Input */
{0x6030, 0x01, 1}, /* Input */
{0x6040, 0x01, 1}, /* Input */
{0x6050, 0x01, 1}, /* Input */
{0x6060, 0x01, 1}, /* Input */
{0x6070, 0x01, 1}, /* Input */
};
static ec_pdo_info_t slave_0_pdos[] = {
{0x1a00, 1, slave_0_pdo_entries + 0}, /* Channel 1 */
{0x1a01, 1, slave_0_pdo_entries + 1}, /* Channel 2 */
{0x1a02, 1, slave_0_pdo_entries + 2}, /* Channel 3 */
{0x1a03, 1, slave_0_pdo_entries + 3}, /* Channel 4 */
{0x1a04, 1, slave_0_pdo_entries + 4}, /* Channel 5 */
{0x1a05, 1, slave_0_pdo_entries + 5}, /* Channel 6 */
{0x1a06, 1, slave_0_pdo_entries + 6}, /* Channel 7 */
{0x1a07, 1, slave_0_pdo_entries + 7}, /* Channel 8 */
};
static ec_sync_info_t slave_0_syncs[] = {
{0, EC_DIR_INPUT, 8, slave_0_pdos + 0, EC_WD_DISABLE},
{0xff}
};
/* Master 0, Slave 1, "EL2008"
* Vendor ID: 0x00000002
* Product code: 0x07d83052
* Revision number: 0x00120000
*/
static ec_pdo_entry_info_t slave_1_pdo_entries[] = {
{0x7000, 0x01, 1}, /* Output */
{0x7010, 0x01, 1}, /* Output */
{0x7020, 0x01, 1}, /* Output */
{0x7030, 0x01, 1}, /* Output */
{0x7040, 0x01, 1}, /* Output */
{0x7050, 0x01, 1}, /* Output */
{0x7060, 0x01, 1}, /* Output */
{0x7070, 0x01, 1}, /* Output */
};
static ec_pdo_info_t slave_1_pdos[] = {
{0x1600, 1, slave_1_pdo_entries + 0}, /* Channel 1 */
{0x1601, 1, slave_1_pdo_entries + 1}, /* Channel 2 */
{0x1602, 1, slave_1_pdo_entries + 2}, /* Channel 3 */
{0x1603, 1, slave_1_pdo_entries + 3}, /* Channel 4 */
{0x1604, 1, slave_1_pdo_entries + 4}, /* Channel 5 */
{0x1605, 1, slave_1_pdo_entries + 5}, /* Channel 6 */
{0x1606, 1, slave_1_pdo_entries + 6}, /* Channel 7 */
{0x1607, 1, slave_1_pdo_entries + 7}, /* Channel 8 */
};
static ec_sync_info_t slave_1_syncs[] = {
{0, EC_DIR_OUTPUT, 8, slave_1_pdos + 0, EC_WD_ENABLE},
{0xff}
};
So my question is am I doing something wrong in the pdo configuration or
do I need to install another kernel?
Best regards
<http://www.cabinplant.com>
Gustav Nicolay MeilbyNobel
Automation Engineer
5683Haarby
Denmark
T:
E-mail: g...@cabinplant.com <mailto:g...@cabinplant.com>
Internet: www.cabinplant.com <http://www.cabinplant.com>
Meet us at:
Exhibition list: www.cabinplant.com/exhibitions
<http://www.cabinplant.com/exhibitions>
Cabinplant register the personal data found in the emails we have received.
You can read more about our privacy policy here
<https://www.cabinplant.com/about-us/privacy-and-cookie-statement/>.
_______________________________________________
etherlab-users mailing list
etherlab-users@etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-users
