Dear Etherlab-users,
I have a problem trying to run the generated code of my Simulink model,
where I
used 2 Beckhoff-Blocks:
I connected an EL1104 to an EL2004, built the code and it generated
several files. By searching I found out that the generated file that has
no ending (like .c or .o) must be executed in the terminal to run the
code (I didnt get a kmod.ko file like described in the
etherlab-1.2.pdf). When I run this file (EtherlabTest) with ./ , I get
an error message saying:
"EtherlabTest: /usr/share/etherlab/src/hrt_main.c:1447: main: Assertion
'ts != 0.0' failed
Aborted"
Im not even sure if this is the correct way to make the model I created
work with Ethercat-Master. My setup is an EK1100 connected to a
powersupply and attached to the EK1100 I have an EL1104, an EL2004 and
an EL3062. The EL1104 is connected from its Input 2 to the Output 1 of
the EL2004. My goal is to send a signal from the EK1104 to the EL2004 by
making and running a Simulink model with Etherlab.
maybe someone has made a similar model already and can help me with this
problem?
Kind Regards
Henrik
--
Etherlab-users mailing list
Etherlab-users@etherlab.org
https://lists.etherlab.org/mailman/listinfo/etherlab-users
