I'm having trouble getting a Compaq 20/40 GB DAT tape drive to work under RH 6.2. The drive is correctly reported during the boot-up hardware check. It's the only scsi device on port 1 (#6). Neither tar (tar -tf /dev/st0) nor mt (mt -f /dev/0 -p) can find it. Both say "no such device". I've verified the cable connections. Compaq's system configuration program correctly locates the drive and reports its status as "OK", so I'm thinking it must be a Red Hat problem at this point. I'm about to plow through "man stinit" to try to create an stinit file to describe the tape. If anyone out there knows about this or can suggest an alternate approach, pls let me know. Mark
