I don't believe the 8129 driver will work with an 8029. If it is a pci card, you
should be able to use the ne-2kpci. If it is an isa card, you need a module called ne.
parameters are things you can put in like:
irq=5 io=220 dma=1
If it's pci, it shouldn't need parameters, just press enter.
Cory
On Wed, Aug 01, 2001 at 12:08:07PM -0700, Sam Crow wrote:
> Hello all, I am trying to do an ftp install of SuSE 7.2. I have made a
> bootdisk as directed and a modules disk that I need for the network modules.
> The installer comes up fine and I choose to install the network modules.
> The modules disk loads up to the ramdisk and then I am givin a list of
> network cards. THere are two options that might work for my card. Realtek
> RTL8129 (although my card is 8029 according to my sys specs in windoze, and
> then the ne-2kpci or something like that. I tried both but when I choose
> either one or any on the list for that matter, the installer then prompts
> for the input of "paramaters". And that's where I get lost. I have no idea
> what they are asking for. Can anyone tell me how to figure out what to put
> in there? Thak you
>
> Sam Crow
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
