Isn't Linux sweet. I don't even think you could have done this with windows. I have 2 Dorio Terminals I had one of them installed and it was great. Seth always said if your box froze up you could reset it from the network. Well X froze up and wouldn't allow me to do anything from the keyboard. I got on my Dorio terminal and killed X. I got my Dorio's at Goodwill for about $5. You have to ask for them since they aren't a hot seller. It's great You can do things like this. I think it was Rob S. who gave me the nickname "Dorioman".
I know if you have a TV tuner card you can do ASCII TV. I never did try it but I still want to. It would be fun to show off. I think if someone saw that running this they would know your a geek. You'd have your speakers for sound and ascii for the video. I wanted to get this going at a weekly clinic. Maybe you can try getting it going. Seth told me where the site was. I think you can do a search of ascii TV. I'm going to have to get my Dorio going again and try ascii TV. Since Mike has a TV card he might want to try it. Tim On Tuesday 08 January 2002 16:35, you wrote: > Never mind. > switched it to /sbin/agetty -L 38400,19200,9600,2400,1200 ttyS1 vt100 > and it works great. > > On Tue, 2002-01-08 at 14:52, Christopher Maujean wrote: > > I have a WYSE WY-60-02-01 terminal connected via a null modem + standard > > serial cable to an x86 redhat 7.2 box. I have it generating a readable > > and properly formatted login screen on the WYSE. However, when I enter a > > username into the login field and press Return, it stops allowing > > multichar input and starts acting like am pressing return between each > > keystroke.. config info follows: > > > > > > WYSE setup: > > > > DISP: > > COLUMS=80 > > LINES=24 > > PAGE LENGTH=1 * LINES > > ATTRIBUTE=CHAR > > STATUS LINE=STANDARD > > SCRL SPEED=JUMP > > CURSOR=BLINK BLOCK > > ANSWERBACK MODE=OFF > > BACKGROUND=DARK > > SCRN SAVER=ON > > DISPLAY CURSOR=ON > > ANSWERBACK CONCEAL=OFF > > > > GENERL: > > PERSONALITY=VT100 > > COMM MODE=FULL DUPLEX > > DATA/PRINTER=MODEM/AUX > > RCVD CR=CR > > ENHANCE=ON > > END OF LINE WRAP=ON > > AUTO SCRL=OFF > > MONITOR=OFF > > FONT LOAD=ON > > SEND ACK=OFF > > INIT TABS=OFF > > WIDTH CHANGE CLEAR=OFF > > > > KEYBRD: > > KEYCLICK=OFF > > RETURN=CRLF > > XMT LIMIT=NONE > > WYSEWORD=OFF > > KEYLOCK=CAPS > > ENTER=CRLF > > FKEY XMT LIMIT=NONE > > LANGUAGE=US > > KEY REPEAT=ON > > CORNER KEY=FUNCT > > BREAK=250MS > > MARGIN BELL=OFF > > > > COMM: > > BAUD RATE=38400 > > RCV HNDSHAKE=NONE > > AUX BAUD RATE=19200 > > AUX RCV HNDSHAKE=XON/XOFF > > DATA/STOP BITS=8/1 > > XMIT HNDSHAKE=NONE > > AUX DATA/STOP BITS=8/1 > > AUX XMIT HNDSHAKE=XON/XOFF > > PARITY=NONE > > XPC HNDSHAKE=OFF > > AUX PARITY=NONE > > > > MISC: > > BLOCK END=US/CR > > AUTO PAGE=OFF > > TVI955 ATTRIBUTE=NO SPACE > > VP60 BLK END=NONE > > LABELS=OFF > > SAVE LABELS=OFF > > PAGE EDIT=OFF > > WPRT INTENSITY=DIM > > WPRT REVERSE=OFF > > WPRT UNDERLINE=OFF > > TEST=OFF > > > > > > Server setup > > /etc/inittab: > > <snip> > > 8:2345:respawn:/sbin/mgetty -r ttyS1 > > <snip> > > > > stty -F /dev/ttyS1: > > speed 38400 baud; line = 0; > > min = 1; time = 0; > > -brkint -icrnl -imaxbel > > -opost -onlcr > > -isig -icanon -iexten -echoe -echok -echoctl -echoke > > > > > > > > > > -- > > Christopher Maujean > > IT Director, Premierelink Communications > > [EMAIL PROTECTED] > > http://www.premierelink.com/ > > 541-344-8575x305 > > > > PGP: > > --------------------------------------------------------------- > > http://www.keyserver.net/ > > KeyID: EFAF4176 > > Fingerprint: 55E6 4DE1 D7D3 361E F265 C094 46F2 7B62 EFAF 4176 > > ---------------------------------------------------------------
