I install Woody with ide-pci option. It had a nice little natsemi.o mod for the kernel.
I have recompiled my own kernel but there is no natsemi.o mod. There IS a fa310tx.o mod for FastGear 310tx eth adp. Mine is 311/321tx. The mod compiles but I get complaints from it.. So when I do from the nictools... natsemi-diag I get these results natsemi-diag.c:v2.04 1/8/2001 Donald Becker ([EMAIL PROTECTED] ) http://www.scyld.com/diag/index.html Index #1: Found a NatSemi DP83815 adapter at 0x1000. No interrupt sources are pending (0000). Rx filter address is 0xc8000000, data is a000. Receive mode is 0xc8000000: Normal unicast and match filter. Rx filter index 0 is a000 Rx filter index 2 is 74cc Rx filter index 4 is a76f Rx filter index 6 is 0000 Rx filter index 8 is 0000 Rx filter index 10 is 0000 Rx filter index 12 is 0000 Rx filter index 14 is 0000 Use '-a' or '-aa' to show device registers, '-e' to show EEPROM contents, -ee for parsed contents, or '-m' or '-mm' to show MII management registers. Where do I go from here? Or where can I get a driver for Woody and my NatGear 311 eth adp.? Thanks in advance.... Daniel
