On Saturday 08 January 2005 02:02 pm, Mr O wrote: : I might have next weekend clear. I'd like to take a look at it. : You've gotten as far as recognizing the controller so it : shouldn't be too much more to recognize the drives.
that would be cool, I really need this to be working by then, im going nuts. I've been messing with raid.s slack kernel... im not sure if its working, but i now have 15 screens worth of /dev dir... maybe something will work. : : Question for you though, do you have the drives set up as an : array on the controller already? If so, break the array and see : if the drives show up when linux boots. right now its setup as an array, but ive had it setup w/out the array, just as "single" disks, with not luck :( Jamie : : --- Linux Rocks! <[EMAIL PROTECTED]> wrote: : > It has another pair of ide channels, the primary one is ata : > 133, and the : > secondary is ata 100. : > I have these drives: : > 2x 200gb ata133 ide maxtor drives. : > 1x 160gb ata133 ide maxtor drive. : > 1x CD/DVDR : > : > The way your supposed to hook this up, would be with the 160 : > on /dev/hda, dvdr : > on /dev/hdc, and the 200gb disks as master/slave on the sis : > 180. : : __________________________________ : Do you Yahoo!? : Meet the all-new My Yahoo! - Try it today! : http://my.yahoo.com : : : _______________________________________________ : EUGLUG mailing list : [email protected] : http://www.euglug.org/mailman/listinfo/euglug -- Let's call it an accidental feature. -- Larry Wall _______________________________________________ EUGLUG mailing list [email protected] http://www.euglug.org/mailman/listinfo/euglug
