That's a whole lot of messaging for one drive. Is it flaky under Windows? Are you plugging directly into the computer (not through a hub)? Who makes your USB controller? What kernel (cat /proc/version)?
--- Alan Crandall <[EMAIL PROTECTED]> wrote: > > > saved all the output from both: > dmesg output > > > usb-storage: device found at 34 > usb-storage: waiting for device to settle before scanning > Vendor: Maxtor 6 Model: L200P0 Rev: BAH4 > Type: Direct-Access ANSI SCSI > revision: 00 > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > /dev/scsi/host33/bus0/target0/lun0: p1 > Attached scsi disk sda at scsi33, channel 0, id 0, lun 0 > usb-storage: device scan complete > usb 4-1: USB disconnect, address 34 > usb 4-1: new high speed USB device using ehci_hcd and address > 35 > scsi34 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 35 > usb-storage: waiting for device to settle before scanning > end_request: I/O error, dev fd0, sector 0 > usb 4-1: USB disconnect, address 35 > usb 4-1: new high speed USB device using ehci_hcd and address > 36 > scsi35 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 36 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 36 > usb 4-1: new high speed USB device using ehci_hcd and address > 37 > scsi36 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 37 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 37 > usb 4-1: new high speed USB device using ehci_hcd and address > 38 > scsi37 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 38 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 38 > usb 4-1: new high speed USB device using ehci_hcd and address > 39 > scsi38 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 39 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 39 > usb 4-1: new high speed USB device using ehci_hcd and address > 40 > scsi39 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 40 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 40 > usb 4-1: new high speed USB device using ehci_hcd and address > 41 > scsi40 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 41 > usb-storage: waiting for device to settle before scanning > Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.2.85 > DST=192.168.2.255 > LEN=175 TOS=0x00 PREC=0x00 TTL=64 ID=2 DF PROTO=UDP SPT=631 > DPT=631 LEN=155 > usb 4-1: USB disconnect, address 41 > usb 4-1: new high speed USB device using ehci_hcd and address > 42 > scsi41 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 42 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 42 > usb 4-1: new high speed USB device using ehci_hcd and address > 43 > scsi42 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 43 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 43 > usb 4-1: new high speed USB device using ehci_hcd and address > 44 > scsi43 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 44 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 44 > usb 4-1: new high speed USB device using ehci_hcd and address > 45 > scsi44 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 45 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 45 > usb 4-1: new high speed USB device using ehci_hcd and address > 46 > scsi45 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 46 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 46 > usb 4-1: new high speed USB device using ehci_hcd and address > 47 > scsi46 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 47 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 47 > usb 4-1: new high speed USB device using ehci_hcd and address > 48 > scsi47 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 48 > usb-storage: waiting for device to settle before scanning > Vendor: Maxtor 6 Model: L200P0 Rev: BAH4 > Type: Direct-Access ANSI SCSI > revision: 00 > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > /dev/scsi/host47/bus0/target0/lun0: p1 > Attached scsi disk sda at scsi47, channel 0, id 0, lun 0 > usb-storage: device scan complete > end_request: I/O error, dev fd0, sector 0 > end_request: I/O error, dev fd0, sector 0 > Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.2.85 > DST=192.168.2.255 > LEN=175 TOS=0x00 PREC=0x00 TTL=64 ID=3 DF PROTO=UDP SPT=631 > DPT=631 LEN=155 > usb 4-1: USB disconnect, address 48 > scsi47 (0:0): rejecting I/O to dead device > FAT: bread failed in fat_clusters_flush > usb 4-1: new high speed USB device using ehci_hcd and address > 49 > scsi48 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 49 > usb-storage: waiting for device to settle before scanning > end_request: I/O error, dev fd0, sector 0 > usb 4-1: USB disconnect, address 49 > usb 4-1: new high speed USB device using ehci_hcd and address > 50 > scsi49 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 50 > usb-storage: waiting for device to settle before scanning > Vendor: Maxtor 6 Model: L200P0 Rev: BAH4 > Type: Direct-Access ANSI SCSI > revision: 00 > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > /dev/scsi/host49/bus0/target0/lun0: p1 > Attached scsi disk sda at scsi49, channel 0, id 0, lun 0 > usb-storage: device scan complete > usb 4-1: USB disconnect, address 50 > usb 4-1: new high speed USB device using ehci_hcd and address > 51 > scsi50 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 51 > usb-storage: waiting for device to settle before scanning > end_request: I/O error, dev fd0, sector 0 > usb 4-1: USB disconnect, address 51 > usb 4-1: new high speed USB device using ehci_hcd and address > 52 > scsi51 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 52 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 52 > usb 4-1: new high speed USB device using ehci_hcd and address > 53 > scsi52 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 53 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 53 > usb 4-1: new high speed USB device using ehci_hcd and address > 54 > scsi53 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 54 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 54 > usb 4-1: new high speed USB device using ehci_hcd and address > 55 > scsi54 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 55 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 55 > usb 4-1: new high speed USB device using ehci_hcd and address > 56 > scsi55 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 56 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 56 > usb 4-1: new high speed USB device using ehci_hcd and address > 57 > scsi56 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 57 > === message truncated ===> dmesg output > > > usb-storage: device found at 34 > usb-storage: waiting for device to settle before scanning > Vendor: Maxtor 6 Model: L200P0 Rev: BAH4 > Type: Direct-Access ANSI SCSI > revision: 00 > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > /dev/scsi/host33/bus0/target0/lun0: p1 > Attached scsi disk sda at scsi33, channel 0, id 0, lun 0 > usb-storage: device scan complete > usb 4-1: USB disconnect, address 34 > usb 4-1: new high speed USB device using ehci_hcd and address > 35 > scsi34 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 35 > usb-storage: waiting for device to settle before scanning > end_request: I/O error, dev fd0, sector 0 > usb 4-1: USB disconnect, address 35 > usb 4-1: new high speed USB device using ehci_hcd and address > 36 > scsi35 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 36 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 36 > usb 4-1: new high speed USB device using ehci_hcd and address > 37 > scsi36 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 37 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 37 > usb 4-1: new high speed USB device using ehci_hcd and address > 38 > scsi37 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 38 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 38 > usb 4-1: new high speed USB device using ehci_hcd and address > 39 > scsi38 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 39 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 39 > usb 4-1: new high speed USB device using ehci_hcd and address > 40 > scsi39 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 40 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 40 > usb 4-1: new high speed USB device using ehci_hcd and address > 41 > scsi40 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 41 > usb-storage: waiting for device to settle before scanning > Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.2.85 > DST=192.168.2.255 LEN=175 TOS=0x00 PREC=0x00 TTL=64 ID=2 DF > PROTO=UDP SPT=631 DPT=631 LEN=155 > usb 4-1: USB disconnect, address 41 > usb 4-1: new high speed USB device using ehci_hcd and address > 42 > scsi41 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 42 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 42 > usb 4-1: new high speed USB device using ehci_hcd and address > 43 > scsi42 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 43 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 43 > usb 4-1: new high speed USB device using ehci_hcd and address > 44 > scsi43 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 44 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 44 > usb 4-1: new high speed USB device using ehci_hcd and address > 45 > scsi44 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 45 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 45 > usb 4-1: new high speed USB device using ehci_hcd and address > 46 > scsi45 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 46 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 46 > usb 4-1: new high speed USB device using ehci_hcd and address > 47 > scsi46 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 47 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 47 > usb 4-1: new high speed USB device using ehci_hcd and address > 48 > scsi47 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 48 > usb-storage: waiting for device to settle before scanning > Vendor: Maxtor 6 Model: L200P0 Rev: BAH4 > Type: Direct-Access ANSI SCSI > revision: 00 > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > /dev/scsi/host47/bus0/target0/lun0: p1 > Attached scsi disk sda at scsi47, channel 0, id 0, lun 0 > usb-storage: device scan complete > end_request: I/O error, dev fd0, sector 0 > end_request: I/O error, dev fd0, sector 0 > Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.2.85 > DST=192.168.2.255 LEN=175 TOS=0x00 PREC=0x00 TTL=64 ID=3 DF > PROTO=UDP SPT=631 DPT=631 LEN=155 > usb 4-1: USB disconnect, address 48 > scsi47 (0:0): rejecting I/O to dead device > FAT: bread failed in fat_clusters_flush > usb 4-1: new high speed USB device using ehci_hcd and address > 49 > scsi48 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 49 > usb-storage: waiting for device to settle before scanning > end_request: I/O error, dev fd0, sector 0 > usb 4-1: USB disconnect, address 49 > usb 4-1: new high speed USB device using ehci_hcd and address > 50 > scsi49 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 50 > usb-storage: waiting for device to settle before scanning > Vendor: Maxtor 6 Model: L200P0 Rev: BAH4 > Type: Direct-Access ANSI SCSI > revision: 00 > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > /dev/scsi/host49/bus0/target0/lun0: p1 > Attached scsi disk sda at scsi49, channel 0, id 0, lun 0 > usb-storage: device scan complete > usb 4-1: USB disconnect, address 50 > usb 4-1: new high speed USB device using ehci_hcd and address > 51 > scsi50 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 51 > usb-storage: waiting for device to settle before scanning > end_request: I/O error, dev fd0, sector 0 > usb 4-1: USB disconnect, address 51 > usb 4-1: new high speed USB device using ehci_hcd and address > 52 > scsi51 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 52 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 52 > usb 4-1: new high speed USB device using ehci_hcd and address > 53 > scsi52 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 53 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 53 > usb 4-1: new high speed USB device using ehci_hcd and address > 54 > scsi53 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 54 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 54 > usb 4-1: new high speed USB device using ehci_hcd and address > 55 > scsi54 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 55 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 55 > usb 4-1: new high speed USB device using ehci_hcd and address > 56 > scsi55 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 56 > usb-storage: waiting for device to settle before scanning > usb 4-1: USB disconnect, address 56 > usb 4-1: new high speed USB device using ehci_hcd and address > 57 > scsi56 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 57 > usb-storage: waiting for device to settle before scanning > Vendor: Maxtor 6 Model: L200P0 Rev: BAH4 > Type: Direct-Access ANSI SCSI > revision: 00 > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > sda: assuming drive cache: write through > /dev/scsi/host56/bus0/target0/lun0: p1 > Attached scsi disk sda at scsi56, channel 0, id 0, lun 0 > usb-storage: device scan complete > Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.2.85 > DST=192.168.2.255 LEN=175 TOS=0x00 PREC=0x00 TTL=64 ID=4 DF > PROTO=UDP SPT=631 DPT=631 LEN=155 > end_request: I/O error, dev fd0, sector 0 > end_request: I/O error, dev fd0, sector 0 > === message truncated ===> _______________________________________________ > EUGLUG mailing list > [email protected] > http://www.euglug.org/mailman/listinfo/euglug > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ EUGLUG mailing list [email protected] http://www.euglug.org/mailman/listinfo/euglug
