It's harder to setup, but you can run colinux and use rsync or samba. CoLinux sits in the windows partition, but can mount the ext3 filesystem. Windows can rsync (or samba?) to/from the CoLinux process.
http://www.colinux.org/ On 01/23/07 05pm, Michael Miller wrote: > I remember reading in this months Linux Journal or Sys Admin about a > Windows ext2 or 3 file system driver. If I find out that it is > different from what Ben posted I will post that information. > > Depending on which version of Fedora Core you are on you may be able > to read NTFS volumes and maybe write too them as well. > > http://www.fedorafaq.org/#ntfs > > Do look at the Linux NTFS webpage and wiki. > > http://www.linux-ntfs.org/ > > Read the Linux NTFS FAQ as well. > > The simple thing may be to just use the 3rd disk. > > On 1/23/07, Ben Barrett <[EMAIL PROTECTED]> wrote: > >I wouldn't rely on this on a regular basis, but it seems to work well for > >the odd need: > >http://www.fs-driver.org/ > >OR > > http://e2fsprogs.sourceforge.net/ext2.html > > > >They will let windows read ext2 or ext3 partitions fs-driver's IFS solution > >says it allows writes as well, > >but I would exercise extreme caution and avoidance of non-native writes, if > >possible, to maintain maximal sanity :) > > > > Ben > > > > > > > >On 1/23/07, Jared Ubelhor <[EMAIL PROTECTED]> wrote: > >> Your biggest problem is that Windows cannot understand Linux file > >systems, > >and Linux can only read NTFS. > >> > >> I work around this problem by having a third hard drive to store files on > >and trade between operating systems. > >> > >> Linux Drive - ext2/ext3/ReiserFS/whatever > >> Windows - NTFS > >> Third Drive - FAT32 > >> > >> This is also nice since it lets me nuke and pave at will to try other > >distros without worring about writing over my files. > >> You might want to invest in a high capacity flash drive. > >> > >> > >> > >> On 1/23/07, Ben Barrett < [EMAIL PROTECTED] > wrote: > >> > > >> > On 1/23/07, Harald Sundt <[EMAIL PROTECTED]> wrote: > >> > > >> > > I have a Laptop with 2 partitions: > >> > > > >> > > Windows XP > >> > > > >> > > Fedora Linux > >> > > > >> > > In Windows,... how do I read data files on my Linux partition > >> > > >> > > >> > This is very difficult if the linux partition is not in a format that > >Windows can understand. > >> > If linux was installed on a FAT partition you should be seeing it > >already.... I remember seeing > >> > an ext2 (or was it ext3) driver for windows, last time I saw it, it was > >read-only for safety. > >> > > >> > > >> > > In Linux,... how do I read files on my Windows Partition > >> > > >> > > >> > Also depends on what part. types you use. Mount the partition on a > >mountpoint, > >> > using the appropriate type (FAT, NTFS, etc), then browse. > >> > > >> > > >> > > I don't ask much! > >> > > > >> > > Thancx > >> > > > >> > > Hal > >> > > >> > > >> > > >> > It doesn't seem like much, but depending on your circumstances, it > >could > >be nigh impossible. :( > >> > > >> > sorry, > >> > > >> > Ben _______________________________________________ EUGLUG mailing list [email protected] http://www.euglug.org/mailman/listinfo/euglug
