Oops, I was going to offer up the settings from the 20" wide LCD I had but I nuked the xorg.conf I had for it when I was moving/renaming my xorg.conf for my 17" LCD. So there goes that idea.
Try taking a look through /var/log and poke through anything with Xorg/xorg. That be all, Mr O. P.S. Is it too early to mention meeting space? --- Jared Ubelhor <[EMAIL PROTECTED]> wrote: > Arg. Ubuntu/Mint drove me nuts telling me I cannot do things > with my own > system, and SUSE is just as almost working as ever. So, I > think I'm going to > give Mandriva a try for a while. I'm using the Mandriva One > 2007 live CD, > and all is great except for one minor issue. Everything is > fuzzy because my > refresh rates are set out of wack. > > It automatically sets them to: > HorizSync 15-94 > VertRefresh 24-88 > > The should be set to: > HorizSync 50.0-65.3 > VertRefresh 60.0-75.0 > > I changed that, but nothing is ever that simple. After > restarting X, my > maximum resolution drops from 1650x1080 to 1280x1024 (or > somewhere around > there). It looks great (no fuzz) except for the part where > it's a tiny > square in the middle of my screen. > Why? Why? Why? Why? > > Help me out here. Make all the suggestions you want. I'm > running on a live > CD, and can back-up and restore files without X, so no harm > can be done. > > Here is the xorg.conf that it automaticllay generates (with > incorrect > refresh rates): > > # File generated by XFdrake (rev 57713) > > > > # > ********************************************************************** > > # Refer to the xorg.conf man page for details about the > format of > > # this file. > > # > ********************************************************************** > > > > Section "Files" > > # font server independent of the X server to render > fonts. > > FontPath "unix/:-1" > > > > # minimal fonts to allow X to run without xfs > > FontPath "/usr/share/fonts/misc:unscaled" > > EndSection > > > > Section "ServerFlags" > > #DontZap # disable <Crtl><Alt><BS> (server abort) > > AllowMouseOpenFail # allows the server to start up even > if the mouse > > does not work > > #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution > switching) > > EndSection > > > > Section "Module" > > Load "dbe" # Double-Buffering Extension > > Load "v4l" # Video for Linux > > Load "extmod" > > Load "type1" > > Load "freetype" > > Load "glx" # 3D layer > > Load "dri" # direct rendering > > EndSection > > > > Section "InputDevice" > > Identifier "Keyboard1" > > Driver "kbd" > > Option "XkbModel" "pc105" > > Option "XkbLayout" "us" > > Option "XkbOptions" "compose:rwin" > > EndSection > > > > Section "InputDevice" > > Identifier "Mouse1" > > Driver "mouse" > > Option "Protocol" "ExplorerPS/2" > > Option "Device" "/dev/mouse" > > EndSection > > > > Section "Monitor" > > Identifier "monitor1" > > VendorName "Plug'n Play" > > ModelName "Sceptre X22WG-Gamer" > > HorizSync 15-94 > > VertRefresh 24-88 > > > > # Monitor preferred modeline (59.9 Hz vsync, 65.2 kHz > hsync, ratio > > 16/10) > > ModeLine "1680x1050" 146 1680 1784 1960 2240 1050 1053 > 1059 1089 > > +hsync -vsync > > ____________________________________________________________________________________ Never Miss an Email Stay connected with Yahoo! Mail on your mobile. Get started! http://mobile.yahoo.com/services?promote=mail _______________________________________________ EUGLUG mailing list [email protected] http://www.euglug.org/mailman/listinfo/euglug
