Christopher Darilek wrote:
I plan to use one of these old PMC controllers in my conversion
(until it blows up). Here's the schematic if any one is interested.
http://4.bp.blogspot.com/-DPY4sZajcTA/UPlnYhw-uOI/AAAAAAAAALY/ZkpKU-eMQ0M/s1600/CurtisPMC.png
Too small to read, but it certainly uses bipolar transistors.
It's getting old but the insides still look very clean. I imagine I
should worry about the electrolytic caps being dried out but I think
I'm just going to let it ride.
If the electrolytics fail, they are likely to destroy the rest of the
controller. It may be cheap insurance to replace them first. They are
the least reliable part of the controller.
--
If we knew what we were doing, it wouldn't be called research, would it?
-- Albert Einstein
--
Lee A. Hart, http://www.sunrise-ev.com/LeesEVs.htm
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA
(http://groups.yahoo.com/group/NEDRA)
