I would start out low, maybe even lower than 0.1C and watch the voltage. If it comes up to over 2.5V then increase the current. I'd also take a surface temperature reading before charging and then during to see if the temperature increases significantly, possibly indicating an internal problem.
On Thu, May 23, 2013 at 1:16 PM, Peakfoto Digital Photo Still n Video < [email protected]> wrote: > I have some dead / or .5 volt or less lfps 40 TS . at what rates amps > should I charge them . .1 c . > > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > For EV drag racing discussion, please use NEDRA ( > http://groups.yahoo.com/group/NEDRA) > > -- David D. Nelson http://evalbum.com/1328 http://www.levforum.com Nokia Lumia 920 Windows Phone 8 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130523/9c8948d1/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
