I have a PakTrakr system in my truck (4x 6 lead acid battery remotes, and one display unit with the amp meter add on).
Recently, one of my remotes has started giving erroneous voltage sensing readings for batteries 2&3. Specifically, battery two appears to be about 2-3 volts too high (9 volts) while battery 3 appears to be around 2-3 volts too low (3 volts). I've measured the batteries, and they are the correct voltages, so it appears to be getting confused and transferring voltage from one to the next. I unplugged the remote from battery 1 (which powers it) to reset it, and everything worked for a day, but after my next charge cycle (overnight) it went back to the same bad behavior. The paktrakr.com website is down/missing; am I correct in assuming the company has ended support for the units? Anybody have any suggestions for things I should try before taking the unit out and cracking it open? Alternatively, anybody have a spare paktrakr 6-8 volt lead acid battery transmitting unit they are looking to sell? Thanks, Jay _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
