This would also help in case the J1772 that you plug into your car is not 240V. In theory, the charging voltage on J1772 is not defined, only the current that is allowed to be drawn. Voltage can be anything such as the 110V (if the J1772 EVSE is plugged into a standard wall outlet) or 240V or 208V (from 3-phase supply).
Cor van de Water Chief Scientist Proxim Wireless Corporation http://www.proxim.com Email: [email protected] Private: http://www.cvandewater.info Skype: cor_van_de_water Tel: +1 408 383 7626 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of EVDL Administrator Sent: Friday, September 20, 2013 9:37 PM To: Electric Vehicle Discussion List Subject: Re: [EVDL] relay coil V You could use a 12v relay powered by a universal input DC switching supply (laptop power puck or similar). Then it would work for any input from (typically) 100 to 250 volts. David Roden - Akron, Ohio, USA EVDL Administrator = = = = = = = = = = = = = = = = = = = = = = = = = = = = = EVDL Information: http://www.evdl.org/help/ = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Note: mail sent to "evpost" and "etpost" addresses will not reach me. To send a private message, please obtain my email address from the webpage http://www.evdl.org/help/ . = = = = = = = = = = = = = = = = = = = = = = = = = = = = = _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA) _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
