For the last 20 years or so I have been putting a diesel block heater in the
conversions I do for heat, Its a aluminium bottle with an input and out put
water system, a heating element in the bottom, you wire it to your dash heat
fan switch, with a 60 amp or 75 amp relay, then to the traction pack for 100
volts DC. it will cook a hot dog at the vents, this runs the floor heat,
defrost, dash vents. they come in 800 W. to 2500 watts , then add a hot water
pump @ 12 volts all tied together, pulls 15 amps @800 watts . I also put a hot
water tank thermostat to the bottle and set it at 140 Deg, this shuts the
traction pack off and on when needed, it works, its simple and it looks like it
BELONGS there , you use the existing heater core and water tubing
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20131014/0dd40a6d/attachment.htm>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA
(http://groups.yahoo.com/group/NEDRA)
