Talking about the stainless steel torque when used with Lithium cells:
I needed the standard M8 metric bolts and washers to connect the Lithium cells that I have and noticed that on Ebay the prices for stainless metric bolts are outrageous, especially if you do not need a few but about a hundred bolts and washers. So, I did a little searching and found a local metal shop that sells stainless steel Metric bolts for a good price. So - if you have trouble locating a good source of Metric bolts for your Lithium cells (such as the Thundersky or CALB or ...) then let me know and I can arrange them for you. I still have some stock of the M8 x 14 (that is about 9/16" thread lenght) which I used myself. I will typically order M8 flat washer with every bolt, unless you want something else. I can offer any number of bolts, $0.20 per bolt + washer for the M8x14 stainless steel bolt + M8 washer, which is a fraction of Ebay price. Regards, Cor van de Water Chief Scientist Proxim Wireless Corporation http://www.proxim.com <http://www.proxim.com> Email: [email protected] Private: http://www.cvandewater.info <http://www.cvandewater.infom> Skype: cor_van_de_water Tel: +1 408 383 7626 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20140120/bdd2c889/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
