I use a Lynch designed flat DC motor which is available from agnimotors.com.

Originally purchased from Ebay as an ex "Robot Wars" fighting machine motor, it 
runs on 36v and I use ex equipment 95Ah lead acid batteries which last at least 
two seasons at a time.

My "Stiga" twin blade mulching mower has around a half hour run time on good 
cells and is quieter and more powerful than the ICE it replaces.

No ear defenders needed which was a main reason for replacing it and the motor 
is ideally designed for vertical shift installation.

Cedric Lynch, the innovator of the motor (and a really nice bloke) has had a 
rocky time over the years with big business stealing his design so go to the 
web site and take a look.

I vastly prefer AC motors for transport but these highly efficient compact DC 
motors are not to be ignored for this type of application.   

Russ
--------------------------------------------
On Fri, 24/4/15, Cor van de Water via EV <[email protected]> wrote:

 Subject: Re: [EVDL] AC motors for mowers
 To: "Electric Vehicle Discussion List" <[email protected]>
 Date: Friday, 24 April, 2015, 21:23
 
 I have a Worx 36V mower
 that has a failed controller, the (DC) motor is good and
 very powerful,
 I have tested it with a 24V
 10A power supply and it hummed!
 But I am not
 needing a bladed mower since my yard is so small and uneven
 that I always end up
 using the weed whacker
 to mow the parts that need mowing.
 
 If you are interested in the 36V DC motor, it
 even has a Hall effect sensor on the axle
 that sits on top of the motor, to maintain RPM
 under varying load, in case you'd like to
 add this to your controller (I think that
 simply integrating the pulse output over time
 to get a DC voltage representative of the speed
 and combining that with any throttle input
 to the motor controller will do the trick. I
 believe Worx calls this "intellicut"
 
 You can pick it up locally in
 Silicon Valley or pay me shipping and I will be happy to
 see
 it go to good use instead of the mower
 sitting neglected in a corner of my terras.
 
 Cor van de Water
 Chief Scientist
 Proxim
 Wireless
 
 office +1 408 383
 7626         Skype: cor_van_de_water
 XoIP   +31 87 784 1130        
 private: cvandewater.info
 www.proxim.com
 
 
 This email
 message (including any attachments) contains confidential
 and proprietary information of Proxim Wireless
 Corporation.  If you received this message in error, please
 delete it and notify the sender.  Any unauthorized use,
 disclosure, distribution, or copying of any part of this
 message is prohibited.
 
 
 -----Original Message-----
 From: EV [mailto:[email protected]]
 On Behalf Of Lee Hart via EV
 Sent: Friday,
 April 24, 2015 12:00 PM
 To: Electric Vehicle
 Discussion List
 Subject: Re: [EVDL] AC
 motors for mowers
 
 ken via
 EV wrote:
 > Where do I find the AC motors
 that are used to run the mower blades 
 >
 that are on the decks of the riding mowers like Recharge n
 Zeon hustler etc.
 > I looking for myabe
 750, 1000 watt motors.
 
 Are
 you sure they're using an AC motor? Every electric mower
 I've seen used plain old brushed DC motors. Either
 it's running directly on the battery (like my ElecTrak,
 or Black & Decker push mower), or it's running off
 the AC line with a bridge rectifier (my Rally mower).
 
 > Also whats the differance
 between Dc brushless and Ac motor?
 
 Fundamentally, they're both AC motors.
 *All* motors are really AC motors!
 
 - A brushed DC motor uses brushes and a
 commutator to convert DC
     into AC for
 the actual motor. Brushed motors can either
     use magnets or wound field coils.
 - A "brushless DC" motor is just an
 AC motor with an electronic
    
 commutator ("inverter") to convert DC into AC for
 the motor.
     Most (but not all)
 brushless DC motor have permanent magnets.
 -
 An AC motor obviously just leaves off whatever device the
 others
     had to convert DC into AC,
 since AC is already available.
     Most
 (but not all) AC motors don't use magnets.
 
 > AC is 3 phase and Dc
 brushless has electronics on the motor that 
 > changes it to AC?
 
 Not quite. AC motors can have any number of
 phases; single-phase, 2-phase, and 3-phase are the most
 common.
 
 The controller (for
 any type of motor) can either be attached to the motor, or
 in a separate box.
 
 --
 If you can't explain it to a six year old,
 you don't understand it yourself. -- Albert Einstein
 --
 Lee Hart, 814 8th Ave N,
 Sartell MN 56377, www.sunrise-ev.com
 _______________________________________________
 UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
 http://lists.evdl.org/listinfo.cgi/ev-evdl.org
 For EV drag racing discussion, please use NEDRA
 (http://groups.yahoo.com/group/NEDRA)
 
 _______________________________________________
 UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
 http://lists.evdl.org/listinfo.cgi/ev-evdl.org
 For EV drag racing discussion, please use NEDRA
 (http://groups.yahoo.com/group/NEDRA)
 
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

Reply via email to