http://www.extremetech.com/extreme/210532-heres-what-racing-a-custom-electric-motorcycle-is-like
Here’s what racing a custom electric motorcycle is like (video)
By Robert Marino  July 22, 2015

[images  
http://www.extremetech.com/wp-content/uploads/2015/07/eSuperSport.jpg

http://www.extremetech.com/wp-content/uploads/2015/07/eSuperSport-4.jpg

http://www.extremetech.com/wp-content/uploads/2015/07/eSuperSport-3.jpg

http://www.extremetech.com/wp-content/uploads/2015/07/eSuperSport-2.jpg


video
https://youtu.be/yU_y39IJBW4
REV1 Sunday Race Front Camera - NJMP 2015 
RIT EVT  Jul 19, 2015
A front view of REV1 running the track on Saturday during the eMotoRacing
varsity challenge - July 2015.
]

For some time now, every year in Millville, New Jersey, colleges and other
competitors from different locations build and race electric motorcycles in
the hopes of taking home the win and zapping the competition at the
e-MotoRacing all-electric race series.

This year, however, was different. From July 10-12, RIT was the only college
that showed up. It represented the underdog in a race of one of six
experienced bike teams to compete in the all-electric vehicle race. Although
competitor’s bike components were normally top secret, I was able to gain
some insight as to what the RIT bike ran on from an exclusive interview with
the EVT (Electronic Vehicle Team).

Here’s what I learned: The REV1 (RIT Electric Vehicle 1) was designed around
a 2005 Kawasaki Ninja ZX6RR chassis. The bike’s gasoline components were
gutted until the inner chassis was bare and built from the ground up.

For power, the bike utilizes a Zero Z-Force 75-7 motor paired with a Sevcon
size 6 controller, which takes the DC current from the batteries and
converts it to AC for the motor to utilize. This also allows the bike’s top
speed to vary from 100-120mph. The motor generates a maximum power of 54hp
at 4300rpm and 68 foot-pounds of torque, making this bike capable of
launching from 0-60 mph in just 5.2 seconds.(Barry Allen would be pleased
with this speed.)

Not only did the team fabricate their own battery management system, battery
containment modules, and structural framing for the powertrain, but they did
it while utilizing in-house data collection and analysis software to enable
for maximum efficiency.

Before the race began, I had the chance to meet the team’s designated rider,
Karl Smolenski, an Engineer at the Cornell Laboratory for Accelerator-based
Sciences and Education and a true bike enthusiast. Both he and the crew were
ecstatic as the underdog team wheeled the bike to the track. The bike was
equipped with two Go Pro cameras; one in the middle of the front fender
(embedded below) and the other on the right rear fender for different
angles.

Saturday’s race started strong as the bike dominated through its first two
laps, but as time progressed, the batteries started to die down quickly.
This caused a significant decrease in power output and the bike to fall
behind. The same inevitable results occurred the following day. (See the
Race results for Saturday and Sunday’s eSuperSport race here).

The Team’s spirits were far from crushed when they received fifth place,
though. Instead, the they celebrated by discussing improvements to be made
next year, cheering as they watched the GoPro footage and sharing the good
sportsmanship as they took photographs with their competitors:

In spite of the commotion, I had the opportunity to follow up with Jeffrey
Botticello, EVT’s Administrative Leader, to discuss what had gone wrong with
the bike and how they planned to fix it. His response is as follows:

“We determined that the reason why the bike dropped speed so much in the
later laps was because the battery voltage was dropping below what the motor
controller was expecting from them. This caused a dip in power. We plan on
remedying this problem by adding two extra battery cells to increase the
total voltage of the pack.”

Next year, after several planned modifications have been made, the team
endeavors to compete in the race and take home the win.
[© extremetech.com]




For EVLN posts use:
http://evdl.org/evln/


{brucedp.150m.com}



--
View this message in context: 
http://electric-vehicle-discussion-list.413529.n4.nabble.com/REV1-custom-electric-racing-motorcycle-v-tp4676980.html
Sent from the Electric Vehicle Discussion List mailing list archive at 
Nabble.com.
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

Reply via email to