Newer versions of their design use two relays, one on each leg, to guard
against a relay failure and to allow self-checks one leg at a time. They
sell a 30A set of 2 for $19.50.
--Rick
On 12/10/2015 09:36 PM, Tom Keenan wrote:
I've made an open EVSE as well. They work great. Just make sure you get a
main relay of sufficient capacity, as the first one I built only had a 20 amp /
240v (4.8 kW) max. Installing a 30 amp version takes the same amount of time
and physical space, and only costs a few dollars more.
Tom Keenan
On Dec 10, 2015, at 5:46 PM, Rick Beebe via EV <[email protected]> wrote:
If it was me and ClipperCreek didn't give me the response I wanted I'd take out
the board and replace it with an OpenEVSE. I've built two OpenEVSE units and
they've both worked flawlessly.
http://store.openevse.com/ and https://code.google.com/p/open-evse/
--Rick
On 12/9/2015 4:46 PM, Steven Lough via EV wrote:
Afternoon EVDL, from a very soggy Seattle:
Can any one REPAIR my ClipperCreek LSC-25 ?
It was on the north side of our home here in Seattle, where it has operated for
over 2 years.,
and was out of harms way by weather for the most part.
But if any one has been following the Weather in the Pacific NW, we have
hadFLOODS, Mud Slides, and record rain fall.
So water finally got into the bottom of the unit. And no amount of drying and
cleaning has brought it back to LIFE.
Only an inch or so of the bottom of the circuit board was exposed to water, and
ruined several components
Have not found any one who could replace or source the board. Have a inquiry
into ClipperCreek.
A whole NEW unit is $379. But the cord, the housing and alike are all OK.
Shame to buy a whole new unit for the lack of a new board.
Pictures of the Unit, and the damage at the bottom of the board can be seen at:
( https://www.flickr.com/photos/23079348@N08/sets/72157662078004711/ )
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Read EVAngel's EV News at http://evdl.org/evln/
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Read EVAngel's EV News at http://evdl.org/evln/
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
