I rather not use because of the price. However, because we are doing the vehicle for a SAE Design competition, if we use shielded HV cable then we do not need to put into conduit.
We need to ground the shield to the chassis. I thought there would be some sort of connector for that. On Wed, Feb 3, 2016 at 4:34 PM, Cor van de Water via EV <[email protected]> wrote: > Ah, that is quite a different beast. I read your request as shielded > input-output cable. > > Note that besides shielding, the other best way to avoid noise from high > power cables is to twist the power cables together, > > so the magnetic fields generated by the two opposite flowing currents > cancel each other out as much as possible, which is not the case > > in mere shielding them. > > Shielding only works if the noise is *capacitive* coupled from the > cable, this requires proximity, high impedance and high freq noise. > > So, know what your noise source is before you spend a lot of money and > effort for no improvement. > > Cor van de Water > Chief Scientist > Proxim Wireless > > office +1 408 383 7626 Skype: cor_van_de_water > XoIP +31 87 784 1130 private: cvandewater.info > > http://www.proxim.com > > This email message (including any attachments) contains confidential and > proprietary information of Proxim Wireless Corporation. If you received > this message in error, please delete it and notify the sender. Any > unauthorized use, disclosure, distribution, or copying of any part of > this message is prohibited. > > ________________________________ > > From: m gol [mailto:[email protected]] > Sent: Wednesday, February 03, 2016 12:08 PM > To: Cor van de Water; Electric Vehicle Discussion List > Subject: Re: [EVDL] SHielded 1/0 > > > > I was looking for something like this: > http://store.evtv.me/proddetail.php?prod=XRADXLE10 > > > > On Wed, Feb 3, 2016 at 2:42 PM, Cor van de Water via EV > <[email protected]> wrote: > > What type you want? Must it be waterproof? > STP (Shielded Twisted Pair) is common for outdoor Ethernet installations > and there are ways to water-proof the connectors (using glands that seal > on the cable so the Modular connector sits inside a weather-protected > environment) > > Cor van de Water > Chief Scientist > Proxim Wireless > > office +1 408 383 7626 <tel:%2B1%20408%20383%207626> > Skype: cor_van_de_water > XoIP +31 87 784 1130 <tel:%2B31%2087%20784%201130> > private: cvandewater.info > > http://www.proxim.com > > This email message (including any attachments) contains confidential and > proprietary information of Proxim Wireless Corporation. If you received > this message in error, please delete it and notify the sender. Any > unauthorized use, disclosure, distribution, or copying of any part of > this message is prohibited. > > > > -----Original Message----- > From: EV [mailto:[email protected]] On Behalf Of m gol via EV > Sent: Wednesday, February 03, 2016 11:34 AM > To: Electric Vehicle Discussion List > Subject: [EVDL] SHielded 1/0 > > Are there any inexpensive place for shielded 1/0 cable and connectors? > > Mike > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20160203/88b2 > a9cb/attachment.htm > <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20160203/88b2 > %0d%0aa9cb/attachment.htm> > > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > Read EVAngel's EV News at http://evdl.org/evln/ > Please discuss EV drag racing at NEDRA > (http://groups.yahoo.com/group/NEDRA) > > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > Read EVAngel's EV News at http://evdl.org/evln/ > Please discuss EV drag racing at NEDRA > (http://groups.yahoo.com/group/NEDRA) > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20160203/449e3deb/attachment.htm > > > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > Read EVAngel's EV News at http://evdl.org/evln/ > Please discuss EV drag racing at NEDRA ( > http://groups.yahoo.com/group/NEDRA) > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20160203/d312b431/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org Read EVAngel's EV News at http://evdl.org/evln/ Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
